Asus A8N-SLI A8N-SLI English edition user's manual, version E2024 - Page 35
A8N-SLI Chassis alarm lead
UPC - 610839124862
View all Asus A8N-SLI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
11. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. A8N-SLI ® CHASSIS (Default) A8N-SLI Chassis alarm lead +5VSB_MB Chassis Signal GND ASUS A8N-SLI 1-27
ASUS A8N-SLI
ASUS A8N-SLI
ASUS A8N-SLI
ASUS A8N-SLI
ASUS A8N-SLI
1-27
1-27
1-27
1-27
1-27
11.
11.
11.
11.
11. Chassis intrusion connector (4-1 pin CHASSIS)
Chassis intrusion connector (4-1 pin CHASSIS)
Chassis intrusion connector (4-1 pin CHASSIS)
Chassis intrusion connector (4-1 pin CHASSIS)
Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or
switch. Connect one end of the chassis intrusion sensor or switch
cable to this connector. The chassis intrusion sensor or switch sends a
high-level signal to this connector when a chassis component is
removed or replaced. The signal is then generated as a chassis
intrusion event.
By default, the pins labeled “Chassis Signal” and “Ground” are shorted
with a jumper cap. Remove the jumper caps only when you intend to
use the chassis intrusion detection feature.
A8N-SLI
A8N-SLI Chassis alarm lead
CHASSIS
+5VSB_MB
Chassis Signal
GND
(Default)