Asus A8N-SLI A8N-SLI English edition user's manual, version E2024 - Page 48

2.3.5 Primary and Secondary IDE Master/Slave Primary IDE Master x Auto Acoustic Management Disabled Primary IDE Master Access Mode [Auto] [Auto] Capacity 13579 MB Cylinder Head Sector PIO Mode UDMA Mode Transfer Mode 26310 16 63 [Auto] [Auto] UDMA 4 Select Menu Item Specific Help Press [Enter] to select. The BIOS automatically detects the values opposite the dimmed items (Capacity, Cylinder, Head, Sector, and Transfer Mode). These values are not user-configurable. These items show N/A if no IDE device is installed in the system. Auto Acoustic Management [Disabled] This option allows drive noise reduction. Configuration options: [Disabled] [Minimum] [Medium] [Maximum] Primary/Secondary IDE Master/Slave [Auto] Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, the BIOS automatically fills in the correct values for the remaining fields on this sub-menu. If the hard disk was already formatted on a previous system, the setup BIOS may detect incorrect parameters. Select [Manual] to manually enter the IDE hard disk drive parameters. If no drive is installed select [None]. Configuration options: [None] [Auto] [Manual] Access Mode [Auto] The default [Auto] allows automatic detection of an IDE hard disk drive. Select [CHS] for this item if you set the IDE Primary Master/Slave to [Manual]. Configuration options: [CHS] [LBA] [Large] [Auto] Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. 2-12 Chapter 2: BIOS setup