Asus A8V-E Deluxe A8V-E Deluxe user's manual English Version E1781 - Page 52
A8V-E DELUXE Chassis alarm lead, A8V-E DELUXE IEEE 1394 connector - a8v deluxe replacement
View all Asus A8V-E Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
+5VSB_MB Chassis Signal GND 10. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. A8V-E DELUXE CHASSIS ® (Default) A8V-E DELUXE Chassis alarm lead 11. IEEE 1394 connector (10-1 pin IE1394_2) These connectors are for IEEE 1394a ports. Connect the IEEE 1394 module cable to this connector, then install the module to a slot opening at the back of the system chassis. A8V-E DELUXE ® 1 IE1394_2 +12V TPB2+ GND TPA2+ GND +12V TPB2GND TPA2- A8V-E DELUXE IEEE 1394 connector Never connect a U S B c a b l e to the IEEE 1394a connectors. Doing so will damage the motherboard! 2-30 Chapter 2: Hardware information