Asus AT5NM10T-I NA User Manual - Page 18
AT5NM10T-I USB device wake-up
View all Asus AT5NM10T-I NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
2. Keyboard/mouse power setting (3-pin PS2_USBPW1-6) This jumper allows you to enable or disable the keyboard/mouse and USB port 1-6 wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the computer by pressing a key on the keyboard, clicking the mouse or using a USB device. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. The PS2_USBPW1-6 jumper is for the rear USB ports. AT5NM10T-I PS2_USBPW1-6 12 23 +5V +5VSB (Default) AT5NM10T-I Keyboard/mouse power setting The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. 3. USB device wake-up (3-pin USBPW7-8) Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). USBPW78 12 23 AT5NM10T-I +5V +5VSB (Default) AT5NM10T-I USB device wake-up • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. ASUS AT5NM10T-I 1-8