Asus ESC4000-FDR G2S User Guide - Page 34
Hard disk drives (HDDs), Installing the 2.5-inch SATA HDD/ SAS HDD
View all Asus ESC4000-FDR G2S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
2.5 Hard disk drives (HDDs) Installing the 2.5-inch SATA HDD/ SAS HDD To install a 2.5-inch HDD: 1. Press the spring lock to release the tray lever and to partially eject the tray from the bay. 2. Firmly hold the tray lever and carefully pull the drive tray out of the bay. Place the drive tray in a clean and flat surface. spring lock tray lever 3. Release the screws on each side of the drive tray to release the drive tray metal beam. metal beam The drive tray metal beam provides horizontal support to the empty drive tray and prevents the drive tray from being bent or deformed. 4. Orient and place the Serial ATA (SATA) HDD/ SAS HDD into the tray. Ensure that the SATA HDD/ SAS HDD is fitted screw hole firmly inside the drive tray and that the four screws of the HDD matches the four screw holes of the drive tray. drive tray screw hole 2-12 Chapter 2: Hardware setup