Asus ESC4000-FDR G2S User Guide - Page 50
Attach the white end of the 4-pin power, is completely seated on the slot.
View all Asus ESC4000-FDR G2S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
9. Secure the front end of the accelerator to the bracket with one screw. 10. Repeat steps 3-9 if you need to install a second accelerator to the bracket. 11. Align and insert the golden fingers of the accelerator bracket into the card slot on the motherboard. Ensure the bracket is completely seated on the slot. 12. Attach the white end of the 4-pin power cable to an available 4-pin power connector in front of the accelerator bracket. 13. Secure the thumbscrew in front of the accelerator bracket. 2-28 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-28
9.
Secure the front end of the accelerator
to the bracket with one screw.
10.
Repeat steps 3—9 if you need to install
a second accelerator to the bracket.
11.
Align and insert the golden fingers of
the accelerator bracket into the card slot
on the motherboard. Ensure the bracket
is completely seated on the slot.
12.
Attach the white end of the 4-pin power
cable to an available 4-pin power
connector in front of the accelerator
bracket.
13.
Secure the thumbscrew in front of the
accelerator bracket.