Asus KFSN4 DRE IKVM User Manual - Page 100
Rebuilding a RAID set
UPC - 610839165896
View all Asus KFSN4 DRE IKVM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
5.2.3 Rebuilding a RAID set To rebuild a RAID set: 1. From the Array List, use the up or down arrow keys to select the RAID set you want to rebuild, then press . The RAID set details appear. NVIDIA RAID Utility Mar 23 2006 - Array List - Boot Yes Yes Id Status 2 Healthy 2 Healthy Vendor NVIDIA NVIDIA Array Model Name STRIPING XXX.XXG MIRRORING XXX.XXG [Ctrl-X]Exit [↑↓]Select [B]Set Boot [N]New Array [ENTER]Detail 2. Press . 3. Use the up or down arrow keys to select a the RAID set you want to rebuild, then press . A confirmation message appears. Array 1 : NVIDIA MIRROR XXX.XXG - Array Detail - RAID Mode: Striping Striping Width: 1 Adapt Channel M/S Striping Block: 64K Index Disk Model Name Capacity 2 1 1 0 Master 0 Master 1 XXXXXXXXXXXXXXXXX XXX.XXGB XXXXXXXXXXXXXXXXX XXX.XXGB [↑↓] Select [F6] Back [F7] Finish 4. Press to start rebuilding the array, or to cancel. The Array List screen displays the RAID set after rebuilding. Rebuild array? [Enter] OK [Esc] Cancel 5-6 Chapter 5: RAID configuration