Home » Asus Manuals » Motherboards » Asus KFSN4 DRE IKVM » Manual Viewer

Asus KFSN4 DRE IKVM User Manual - Page 47

Front and rear fan connectors 3-pin FRNT_FAN1, FRNT_FAN2, FRNT

UPC - 610839165896

View all Asus KFSN4 DRE IKVM manuals

Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

6. Front and rear fan connectors (3-pin FRNT_FAN1, FRNT_FAN2, FRNT_ FAN3, FRNT_FAN4, REAR_FAN1, REAR_FAN2, REAR_FAN3, REAR_ FAN4, REAR_FAN5, REAR_FAN6) The fan connectors support cooling fans of 350mA~2000mA (24 W max.) or a total of 1A~3.48A (41.76 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. • DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! • All fans feature the ASUS Smart Fan technology. REAR_FAN4 REAR_FAN3 REAR_FAN2 REAR_FAN1 FRNT_FAN6 FRNT_FAN5 FRNT_FAN4 FRNT_FAN3 FRNT_FAN2 FRNT_FAN1 REAR_FAN4 REAR_FAN3 REAR_FAN2 REAR_FAN1 KFSN4-DRE Series Fan connectors PWM Control FAN Speed FAN Power GND PWM Control FAN Speed FAN Power GND PWM Control FAN Speed FAN Power GND PWM Control FAN Speed FAN Power GND REAR_FAN6 REAR_FAN5 PWM Control FAN Speed FAN Power GND PWM Control FAN Speed FAN Power GND FRNT_FAN4 FRNT_FAN3 PWM Control FAN Speed FAN Power GND PWM Control FAN Speed FAN Power GND FRNT_FAN1 FRNT_FAN2 GND FAN Power FAN Speed PWM Control GND FAN Power FAN Speed PWM Control 7. Serial port connector (10-1 pin COM2) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. ® ® COM2 PIN1 KFSN4-DRE Series Serial port connector ASUS KFSN4-DRE Series 2-27

Section	Page
KFSN4-DRE Series specifications summary	11
Product introduction	13
1.1 Welcome!	15
1.2 Package contents	15
1.3 Serial number label	15
1.4 Special features	16
1.4.1 Product highlights	16
1.4.2 Innovative ASUS features	17
Hardware information	19
2.1 Before you proceed	21
2.2 Motherboard overview	23
2.2.1 Placement direction	23
2.2.2 Screw holes	23
2.2.4 Motherboard layouts	24
2.2.5 Layout contents	29
2.3.1 Installing the CPU	29
2.3.2 Installing the heatsink	32
2.4 System memory	33
2.4.1 Overview	33
2.4.2 Memory Configurations	34
2.4.3 Installing a DIMM	35
2.4.4 Removing a DIMM	35
2.5 Expansion slots	36
2.5.1 Installing an expansion card	36
2.5.2 Configuring an expansion card	36
2.5.3 Interrupt assignments	37
2.5.4 PCI Express x16 slot (x8 link or x16 link)	38
2.5.5 BMC socket	38
2.6 Jumpers	39
2.7 Connectors	44
Powering up	53
3.1 Starting up for the first time	55
3.2 Powering off the computer	56
3.2.1 Using the OS shut down function	56
3.2.2 Using the dual function power switch	56
BIOS setup	57
4.1 Managing and updating your BIOS	59
4.1.1 Creating a bootable floppy disk	59
4.1.2 AFUDOS utility	60
4.1.3 ASUS CrashFree BIOS 2 utility	62
4.2 BIOS setup program	63
4.2.1 BIOS menu screen	64
4.2.2 Menu bar	64
4.2.3 Navigation keys	64
4.2.4 Menu items	65
4.2.5 Sub-menu items	65
4.2.6 Configuration fields	65
4.2.7 Pop-up window	65
4.2.8 Scroll bar	65
4.2.9 General help	65
4.3 Main menu	66
4.3.1 System Date [Day xx/xx/xxxx]	66
4.3.2 System Time [xx:xx:xx]	66
4.3.3 Floppy A [1.44 MB 3½”]	66
4.3.4 IDE Configuration	67
4.3.5 Primary/Secondary IDE Master/Slave; Tertiary/Fourth/ Fifth/Sixth IDE Master	68
4.3.6 System Information	69
4.4 Advanced menu	71
4.4.1 CPU Configuration	71
4.4.2 Chipset Configuration	72
4.4.3 PCI PnP	78
4.4.4 USB Configuration	79
4.4.5 Peripheral Devices Configuration	80
4.4.6 ACPI Configuration	81
4.4.7 APM Configuration	82
4.4.8 Hardware Monitor	83
4.5 Server menu	85
4.5.1 Remote Access Configuration	85
4.6 Security	87
4.7 Boot menu	89
4.7.1 Boot Device Priority	89
4.7.2 Boot Settings Configuration	90
4.8 Exit menu	91
RAID configuration	93
5.1 Setting up RAID	95
5.1.1 RAID definitions	95
5.1.2 Installing hard disk drives	96
5.1.3 Setting the BIOS RAID items	96
5.1.4 RAID configuration utilities	96
5.2 NVIDIA® RAID configurations	97
5.2.1 Entering the NVIDIA® RAID Utility	97
5.2.2 Creating a RAID Volume	98
5.2.3 Rebuilding a RAID set	100
5.2.4 Deleting a RAID array	101
5.2.5 Clearing the disk data	102
5.3 LSI Logic MPT Setup Utility (KFSN4-DRE/SAS model only)	103
5.3.1 Integrated Mirroring	103
5.3.2 Integrated Mirroring Enhanced	107
5.3.3 Integrated Striping (IS) volume	109
5.3.4 Managing Arrays	112
5.3.5 Viewing SAS topology	117
5.5.6 Global Properties	119
Driver installation	123
6.1 RAID driver installation	125
6.1.1 Creating a RAID driver disk	125
6.1.2 Installing the RAID controller driver	128
6.2 LAN driver installation	131
6.3 nVIDIA® driver installation	134
6.3.1 Windows 2000/Server 2003	134
6.4 Management applications and utilities installation	137
6.4.1 Running the support CD	137
6.4.2 Drivers menu	137
6.4.3 Management Software menu	138
6.4.4 Utilities menu	138
6.4.5 Contact information	138
Reference information	139
A.1 KFSN4-DRE/SAS model block diagram	141
A.2 KFSN4-DRE/2S model block diagram	142

Match case Limit results 1 per page

ASUS KFSN4-DRE Series

2-27

Front and rear fan connectors (3-pin FRNT_FAN1, FRNT_FAN2, FRNT_

FAN3, FRNT_FAN4, REAR_FAN1, REAR_FAN2, REAR_FAN3, REAR_

FAN4, REAR_FAN5, REAR_FAN6)

The fan

connectors support cooling fans of 350mA~2000mA (24 W max.) or

a total of 1A~3.48A (41.76 W max.) at +12V. Connect the fan cables to the

fan connectors on the motherboard, making sure that the black wire of each

cable matches the ground pin of the connector.

•

DO NOT forget to connect the fan cables to the fan connectors. Insufﬁcient

air ﬂow inside the system may damage the motherboard components.

These are not jumpers! DO NOT place jumper caps on the fan connectors!

•

All fans feature the ASUS Smart Fan technology.

KFSN4-DRE Series Fan connectors

FRNT_FAN1

FRNT_FAN6

FRNT_FAN5

REAR_FAN4

REAR_FAN3

REAR_FAN2

REAR_FAN1

GND

FAN Power

FAN Speed

PWM Control

FRNT_FAN4

FRNT_FAN3

FRNT_FAN2

FRNT_FAN1

GND

FAN Power

FAN Speed

PWM Control

REAR_FAN4

GND

FAN Power

FAN Speed

PWM Control

REAR_FAN3

GND

FAN Power

FAN Speed

PWM Control

REAR_FAN2

GND

FAN Power

FAN Speed

PWM Control

REAR_FAN1

FRNT_FAN2

GND

FAN Power

FAN Speed

PWM Control

GND

FAN Power

FAN Speed

PWM Control

FRNT_FAN4

GND

FAN Power

FAN Speed

PWM Control

FRNT_FAN3

GND

FAN Power

FAN Speed

PWM Control

REAR_FAN6

GND

FAN Power

FAN Speed

PWM Control

REAR_FAN5

Serial port connector (10-1 pin COM2)

This connector is for a serial (COM) port. Connect the serial port module

cable to this connector, then install the module to a slot opening at the back

of the system chassis.

KFSN4-DRE Series Serial port connector

PIN1

COM2