Home » Asus Manuals » Motherboards » Asus KFSN4 DRE IKVM » Manual Viewer

Asus KFSN4 DRE IKVM User Manual - Page 104

Adapter Properties, RAID Properties, Select New Array Type, Create IM Volume

UPC - 610839165896

View all Asus KFSN4 DRE IKVM manuals

Add to My Manuals
Save this manual to your list of manuals

Page 104 highlights

3. The following screen appears. Select a channel and press to enter the setup. LSI Logic Config Utility Adapter List Global Properties v6.16.00.00 (2007.05.07) Adapter SAS1064E PCI PCI PCI PCI FW Revision BUS Dev Fnc Slot 04 03 00 00 1.22.01.00-IR Status Enabled Boot Order 0 Esc = Exit Menu F1/Shift+1 = Help Alt+N = Global Properties -/+ = Alter Boot Order Ins/Del = Alter Boot List The numbers of the channel depend on the controller. 4. The Adapter Properties screen appears. Use the arrow keys to select RAID Properties, then press . LSI Logic Config Utility Adapter Properties -- SAS1064E Adapter PCI Slot PCI Address(Bus/Dev/Func) MPT Firmware Revision SAS Address NVDATA Version Status Boot Order Boot Support v6.16.00.00 (2007.05.07) SAS1064E 00 04:00:00 1.22.01.00-IR 500E0101:23456712 2B.00 Enabled 0 (Enabled BIOS & OS) RAID Properties SAS Topology Advanced Adapter Properties Esc = Exit Menu F1/Shift+1 = Help Enter = Select Item -/+ = Change Item 5. The Select New Array Type screen appears. Use the arrow keys to select Create IM Volume, then press . LSI Logic Config Utility v6.16.00.00 (2007.05.07) Select New Array Type -- SAS1064E Create IM Volume Create Integrated Mirror Array of 2 disks plus up to 2 optional hot spares. Data on the primary disk may be migrated. Create IME Volume Create Integrated Mirrored Enhanced Array of 3 to 10 disks including up to 2 optional hot spares. ALL DATA on array disks will be DELETED! Create IS Volume Create Integrated Striping array of 2 to 10 disks. ALL DATA on array disks will be DELETED! Esc = Exit Menu F1/Shift+1 = Help Enter = Choose array type to create 5-10 Chapter 5: RAID configuration

Section	Page
KFSN4-DRE Series specifications summary	11
Product introduction	13
1.1 Welcome!	15
1.2 Package contents	15
1.3 Serial number label	15
1.4 Special features	16
1.4.1 Product highlights	16
1.4.2 Innovative ASUS features	17
Hardware information	19
2.1 Before you proceed	21
2.2 Motherboard overview	23
2.2.1 Placement direction	23
2.2.2 Screw holes	23
2.2.4 Motherboard layouts	24
2.2.5 Layout contents	29
2.3.1 Installing the CPU	29
2.3.2 Installing the heatsink	32
2.4 System memory	33
2.4.1 Overview	33
2.4.2 Memory Configurations	34
2.4.3 Installing a DIMM	35
2.4.4 Removing a DIMM	35
2.5 Expansion slots	36
2.5.1 Installing an expansion card	36
2.5.2 Configuring an expansion card	36
2.5.3 Interrupt assignments	37
2.5.4 PCI Express x16 slot (x8 link or x16 link)	38
2.5.5 BMC socket	38
2.6 Jumpers	39
2.7 Connectors	44
Powering up	53
3.1 Starting up for the first time	55
3.2 Powering off the computer	56
3.2.1 Using the OS shut down function	56
3.2.2 Using the dual function power switch	56
BIOS setup	57
4.1 Managing and updating your BIOS	59
4.1.1 Creating a bootable floppy disk	59
4.1.2 AFUDOS utility	60
4.1.3 ASUS CrashFree BIOS 2 utility	62
4.2 BIOS setup program	63
4.2.1 BIOS menu screen	64
4.2.2 Menu bar	64
4.2.3 Navigation keys	64
4.2.4 Menu items	65
4.2.5 Sub-menu items	65
4.2.6 Configuration fields	65
4.2.7 Pop-up window	65
4.2.8 Scroll bar	65
4.2.9 General help	65
4.3 Main menu	66
4.3.1 System Date [Day xx/xx/xxxx]	66
4.3.2 System Time [xx:xx:xx]	66
4.3.3 Floppy A [1.44 MB 3½”]	66
4.3.4 IDE Configuration	67
4.3.5 Primary/Secondary IDE Master/Slave; Tertiary/Fourth/ Fifth/Sixth IDE Master	68
4.3.6 System Information	69
4.4 Advanced menu	71
4.4.1 CPU Configuration	71
4.4.2 Chipset Configuration	72
4.4.3 PCI PnP	78
4.4.4 USB Configuration	79
4.4.5 Peripheral Devices Configuration	80
4.4.6 ACPI Configuration	81
4.4.7 APM Configuration	82
4.4.8 Hardware Monitor	83
4.5 Server menu	85
4.5.1 Remote Access Configuration	85
4.6 Security	87
4.7 Boot menu	89
4.7.1 Boot Device Priority	89
4.7.2 Boot Settings Configuration	90
4.8 Exit menu	91
RAID configuration	93
5.1 Setting up RAID	95
5.1.1 RAID definitions	95
5.1.2 Installing hard disk drives	96
5.1.3 Setting the BIOS RAID items	96
5.1.4 RAID configuration utilities	96
5.2 NVIDIA® RAID configurations	97
5.2.1 Entering the NVIDIA® RAID Utility	97
5.2.2 Creating a RAID Volume	98
5.2.3 Rebuilding a RAID set	100
5.2.4 Deleting a RAID array	101
5.2.5 Clearing the disk data	102
5.3 LSI Logic MPT Setup Utility (KFSN4-DRE/SAS model only)	103
5.3.1 Integrated Mirroring	103
5.3.2 Integrated Mirroring Enhanced	107
5.3.3 Integrated Striping (IS) volume	109
5.3.4 Managing Arrays	112
5.3.5 Viewing SAS topology	117
5.5.6 Global Properties	119
Driver installation	123
6.1 RAID driver installation	125
6.1.1 Creating a RAID driver disk	125
6.1.2 Installing the RAID controller driver	128
6.2 LAN driver installation	131
6.3 nVIDIA® driver installation	134
6.3.1 Windows 2000/Server 2003	134
6.4 Management applications and utilities installation	137
6.4.1 Running the support CD	137
6.4.2 Drivers menu	137
6.4.3 Management Software menu	138
6.4.4 Utilities menu	138
6.4.5 Contact information	138
Reference information	139
A.1 KFSN4-DRE/SAS model block diagram	141
A.2 KFSN4-DRE/2S model block diagram	142

Match case Limit results 1 per page

5-10

Chapter 5: RAID conﬁguration

The

Adapter Properties

screen appears.

Use the arrow keys to select

RAID Properties

, then press <Enter>.

The

Select New Array Type

screen appears.

Use the arrow keys to select

Create IM Volume

, then press <Enter>.

The following screen appears. Select a channel and press <Enter> to enter

the setup.

The numbers of the channel depend on the controller.

Esc = Exit Menu

F1/Shift+1 = Help

Alt+N = Global Properties

-/+ = Alter Boot Order

Ins/Del = Alter Boot List

LSI Logic Conﬁg Utility

v6.16.00.00 (2007.05.07)

Adapter List

Global Properties

Adapter

PCI

FW Revision

Status

Boot

BUS

Dev

Fnc

Slot

Order

SAS1064E

1.22.01.00-IR

Enabled

Esc = Exit Menu

F1/Shift+1 = Help

Enter = Select Item

-/+ = Change Item

LSI Logic Conﬁg Utility

v6.16.00.00 (2007.05.07)

Adapter Properties -- SAS1064E

Adapter

SAS1064E

PCI Slot

PCI Address(Bus/Dev/Func)

04:00:00

MPT Firmware Revision

1.22.01.00-IR

SAS Address

500E0101:23456712

NVDATA Version

2B.00

Status

Enabled

Boot Order

Boot Support

(Enabled BIOS & OS)

RAID Properties

SAS Topology

Advanced Adapter Properties

Esc = Exit Menu

F1/Shift+1 = Help

Enter = Choose array type to create

LSI Logic Conﬁg Utility

v6.16.00.00 (2007.05.07)

Select New Array Type -- SAS1064E

Create IM Volume

Create Integrated Mirror Array of 2

disks plus up to 2 optional hot spares.

Data on the primary disk may be migrated.

Create IME Volume

Create Integrated Mirrored Enhanced

Array of 3 to 10 disks including up

to 2 optional hot spares.

ALL DATA

on array disks will be DELETED!

Create IS Volume

Create Integrated Striping array of

2 to 10 disks.

ALL DATA

on array disks will be DELETED!