Home » Asus Manuals » Motherboards » Asus M4N78 SE » Manual Viewer

Asus M4N78 SE User Manual - Page 14

Before you proceed

Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

1.4 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity • Hold components by the edges to avoid touching the ICs on them. • Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. Onboard LED The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. 1-4 Chapter 1: Product introduction

Section	Page
Notices	6
Safety information	7
About this guide	7
M4N78 SE specifications summary	9
Chapter 1: Product introduction	11
1.1 Welcome!	11
1.2 Package contents	11
1.3 Special features	11
1.3.1 Product highlights	11
1.3.2 Innovative ASUS features	13
1.4 Before you proceed	14
1.5 Motherboard overview	15
1.5.1 Placement direction	15
1.5.2 Screw holes	15
1.5.3 Motherboard layout	16
1.5.4 Layout contents	16
1.6 Central Processing Unit (CPU)	17
1.6.1 Installing the CPU	17
1.6.2 Installing the heatsink and fan	19
1.7 System memory	20
1.7.1 Overview	20
1.7.2 Memory configurations	21
1.7.3 Installing a DIMM	26
1.7.4 Removing a DIMM	26
1.8 Expansion slots	27
1.8.1 Installing an expansion card	27
1.8.2 Configuring an expansion card	27
1.8.3 PCI slots	27
1.8.4 PCI Express x1 slot	27
1.8.5 PCI Express x16 slot	27
1.9 Jumpers	28
1.10 Connectors	30
1.10.1 Rear panel connectors	30
1.10.2 Internal connectors	31
1.11 Software support	36
1.11.1 Installing an operating system	36
1.11.2 Support DVD information	36
Chapter 2: BIOS information	37
2.1 Managing and updating your BIOS	37
2.1.1 ASUS Update utility	37
2.1.2 ASUS EZ Flash 2 utility	38
2.1.3 ASUS CrashFree BIOS 3 utility	39
2.2 BIOS setup program	40
2.2.1 BIOS menu screen	41
2.2.2 Menu bar	41
2.2.3 Navigation keys	42
2.2.4 Menu items	42
2.2.5 Sub-menu items	42
2.2.6 Configuration fields	42
2.2.7 General help	42
2.2.8 Pop-up window	42
2.2.9 Scroll bar	42
2.3 Main menu	43
2.3.1 System Time [xx:xx:xx]	43
2.3.2 System Date [Day xx/xx/xxxx]	43
2.3.3 Primary IDE Master/Slave and SATA 1~4	43
2.3.4 Storage Configuration	44
2.3.5 System Information	45
2.4 Advanced menu	45
2.4.1 JumperFree Configuration	45
2.4.2 CPU Configuration	48
2.4.3 Chipset	48
2.4.4 Onboard Devices Configuration	49
2.4.5 PCI PnP	50
2.4.6 USB Configuration	50
2.5 Power menu	51
2.5.1 Suspend Mode [Auto]	51
2.5.2 ACPI 2.0 Support [Disabled]	51
2.5.3 ACPI APIC Support [Enabled]	51
2.5.4 APM Configuration	51
2.5.5 Hardware Monitor	52
2.6 Boot menu	53
2.6.1 Boot Device Priority	53
2.6.2 Boot Settings Configuration	53
2.6.3 Security	54
2.7 Tools menu	55
2.7.1 ASUS EZ Flash 2	55
2.7.2 Express Gate [Auto]	56
2.7.3 AI NET 2	56

Match case Limit results 1 per page

1-4

Chapter 1: Product introduction

Onboard LED

The motherboard comes with a standby power LED that lights up to indicate that the system

is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down

the system and unplug the power cable before removing or plugging in any motherboard

component. The illustration below shows the location of the onboard LED.

1.4

Before you proceed

Take note of the following precautions before you install motherboard components or change

any motherboard settings.

•

Unplug the power cord from the wall socket before touching any component.

•

Use a grounded wrist strap or touch a safely grounded object or a metal object, such

as the power supply case, before handling components to avoid damaging them due to

static electricity

•

Hold components by the edges to avoid touching the ICs on them.

•

Whenever you uninstall any component, place it on a grounded antistatic pad or in the

bag that came with the component.

•

Before you install or remove any component, ensure that the ATX power supply is

switched off or the power cord is detached from the power supply. Failure to do so may

cause severe damage to the motherboard, peripherals, or components.