Home » Asus Manuals » Motherboards » Asus M4N78 SE » Manual Viewer

Asus M4N78 SE User Manual - Page 20

System memory - sound

Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

3. Align the other end of the retention bracket to the retention module base. A clicking sound denotes that the retention bracket is in place. Ensure that the fan and heatsink assembly perfectly fits the retention mechanism module base, otherwise you cannot snap the retention bracket in place. 4. Push down the retention bracket lock on the retention mechanism to secure the heatsink and fan to the module base. 5. When the fan and heatsink assembly is in place, connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN. Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. 1.7 System memory 1.7.1 Overview The motherboard comes with two Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched differently to prevent installation on a DDR DIMM socket. The figure illustrates the location of the DDR2 DIMM sockets: Channel Channel A Channel B Sockets DIMM_A1 DIMM_B1 1-10 Chapter 1: Product introduction

Section	Page
Notices	6
Safety information	7
About this guide	7
M4N78 SE specifications summary	9
Chapter 1: Product introduction	11
1.1 Welcome!	11
1.2 Package contents	11
1.3 Special features	11
1.3.1 Product highlights	11
1.3.2 Innovative ASUS features	13
1.4 Before you proceed	14
1.5 Motherboard overview	15
1.5.1 Placement direction	15
1.5.2 Screw holes	15
1.5.3 Motherboard layout	16
1.5.4 Layout contents	16
1.6 Central Processing Unit (CPU)	17
1.6.1 Installing the CPU	17
1.6.2 Installing the heatsink and fan	19
1.7 System memory	20
1.7.1 Overview	20
1.7.2 Memory configurations	21
1.7.3 Installing a DIMM	26
1.7.4 Removing a DIMM	26
1.8 Expansion slots	27
1.8.1 Installing an expansion card	27
1.8.2 Configuring an expansion card	27
1.8.3 PCI slots	27
1.8.4 PCI Express x1 slot	27
1.8.5 PCI Express x16 slot	27
1.9 Jumpers	28
1.10 Connectors	30
1.10.1 Rear panel connectors	30
1.10.2 Internal connectors	31
1.11 Software support	36
1.11.1 Installing an operating system	36
1.11.2 Support DVD information	36
Chapter 2: BIOS information	37
2.1 Managing and updating your BIOS	37
2.1.1 ASUS Update utility	37
2.1.2 ASUS EZ Flash 2 utility	38
2.1.3 ASUS CrashFree BIOS 3 utility	39
2.2 BIOS setup program	40
2.2.1 BIOS menu screen	41
2.2.2 Menu bar	41
2.2.3 Navigation keys	42
2.2.4 Menu items	42
2.2.5 Sub-menu items	42
2.2.6 Configuration fields	42
2.2.7 General help	42
2.2.8 Pop-up window	42
2.2.9 Scroll bar	42
2.3 Main menu	43
2.3.1 System Time [xx:xx:xx]	43
2.3.2 System Date [Day xx/xx/xxxx]	43
2.3.3 Primary IDE Master/Slave and SATA 1~4	43
2.3.4 Storage Configuration	44
2.3.5 System Information	45
2.4 Advanced menu	45
2.4.1 JumperFree Configuration	45
2.4.2 CPU Configuration	48
2.4.3 Chipset	48
2.4.4 Onboard Devices Configuration	49
2.4.5 PCI PnP	50
2.4.6 USB Configuration	50
2.5 Power menu	51
2.5.1 Suspend Mode [Auto]	51
2.5.2 ACPI 2.0 Support [Disabled]	51
2.5.3 ACPI APIC Support [Enabled]	51
2.5.4 APM Configuration	51
2.5.5 Hardware Monitor	52
2.6 Boot menu	53
2.6.1 Boot Device Priority	53
2.6.2 Boot Settings Configuration	53
2.6.3 Security	54
2.7 Tools menu	55
2.7.1 ASUS EZ Flash 2	55
2.7.2 Express Gate [Auto]	56
2.7.3 AI NET 2	56

Match case Limit results 1 per page

1-10

Chapter 1: Product introduction

1.7

System memory

1.7.1

Overview

The motherboard comes with two Double Data Rate 2 (DDR2) Dual Inline Memory Modules

(DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but

has

a 240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched

differently to prevent installation on a DDR DIMM socket. The ﬁgure illustrates the location of

the DDR2 DIMM sockets:

Channel

Sockets

Channel A

DIMM_A1

Channel B

DIMM_B1

Align the other end of the retention bracket to the retention module base. A clicking

sound denotes that the retention bracket is in place.

Ensure that the fan and heatsink assembly perfectly ﬁts the retention mechanism module

base, otherwise you cannot snap the retention bracket

in place.

Push down the retention bracket lock on the retention mechanism to secure the

heatsink and fan to the module base.

When the fan and heatsink assembly is in place, connect the CPU fan cable to the

connector on the motherboard labeled CPU_FAN.

Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if

you fail to plug this connector.