Asus M5A78L-M LE USB3 User Guide - Page 25
M5A78L-M LE/USB3 Speaker Out connector - bios
View all Asus M5A78L-M LE USB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3. Serial ATA 3.0 Gb/s connectors (7-pin SATA3G 1~4) These connectors are for the Serial ATA 3.0 Gb/s signal cables for Serial ATA hard disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 10 and JBOD configuration through the onboard controller. GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND GND RSATA_RXP3 RSATA_RXN3 GND RSATA_TXN3 RSATA_TXP3 GND GND RSATA_RXP4 RSATA_RXN4 GND RSATA_TXN4 RSATA_TXP4 GND M5A78L-M LE/USB3 SATA3G_1 SATA3G_2 SATA3G_3 SATA3G_4 M5A78L-M LE/USB3 SATA 3.0Gb/s connectors • These connectors are set to IDE mode by default. If you intend to create a Serial ATA RAID set using these connectors, set the type of the SATA connectors in the BIOS to [RAID]. See section 2.3.4 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later version. • When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to [AHCI]. See section 2.3.4 SATA Configuration for details. 4. Speaker connector (4-pin SPEAKER) This 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. SPEAKER +5V GND GND Speaker Out M5A78L-M LE/USB3 PIN 1 M5A78L-M LE/USB3 Speaker Out connector ASUS M5A78L-M LE/USB3 1-17