Asus MAXIMUS FORMULA SPECIAL Maximus Formula user's manual English Edition Ver - Page 105

VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage, CPU VTT Voltage, NB Voltage, MEM Voltage, VTT DDR Voltage, South Bridge Voltage, SB Voltage2 The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. OPT Q-Fan and Temperature BIOS SETUP UTILITY Power OPT_Fan 1 Reading OPT_Fan1 Q-Fan Control Duty Cycle Mode OPT_Fan 2 Reading OPT_Fan2 Q-Fan Control Duty Cycle Mode OPT_Fan 3 Reading OPT_Fan3 Q-Fan Control Duty Cycle Mode :N/A [DUTY CYCLE] [90%] :N/A [DUTY CYCLE] [90%] :N/A [DUTY CYCLE] [90%] Fan configuration mode setting Select Screen Select Item +- Change Field F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2007, American Megatrends, Inc. The onboard hardware monitor automatically detects the optional fan speed. If the fan is not connected to the motherboard, the field shows N/A. OPT_Fan1/2/3 Q-Fan Control [DUTY CYCLE] Allows you to select the optional fan control mode. When this item is set to [DUTY CYCLE], you can configure the Duty Cycle Mode item. If you set this item to [Q-FAN], you are allowed to configure the TargetTemp Value item. The Q-Fan detects the temperature of the fan connected to the OPT_ FAN1/2/3 connector and adjusts the fan speed. Configuraiton options: [DUTY CYCLE] [Q-FAN] You need to connect the thermal sensor cables to the OPT_TEMP1/2/3 connectors to enable this function. Duty Cycle Mode [90%] Allows you to set the fan duty cycle. When the OPT_Fan1/2/3 Q-Fan Control item is set to [Q-FAN], this item does not appear. Configuraiton options: [70%] [80%] [90%] [100%] TargetTemp Value [32] Allows you to set the temperature at which the optional fan starts up. When the OPT_Fan1/2/3 Q-Fan Control item is set to [DUTY CYCLE], this item does not appear. Configuration options: [16] [24] [32] [40] [48] [56] [64] [72] ROG Maximus Formula (Special Edition) / Maximus Formula 4-33