Asus P4B-FX P4B-FX User Manual - Page 39
on LAN models only, LAN Settings, Clear RTC RAM
View all Asus P4B-FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4. LAN controller (3-pin LAN_EN) (on LAN models only) This jumper allows you to enable or disable the onboard Local Area Network (LAN) feature. The default setting is Enabled. LAN_EN P4B-FX P4B-FX LAN Setting Figure 2-23 LAN Settings 1 2 Enabled (Default) 2 3 Disabled 5. Clear RTC RAM (CLRTC) These pads allow you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The RAM data in CMOS, that include system setup information such as system passwords, is powered by the onboard button cell battery. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Remove the battery. 3. Short the two pads for a few seconds. 4. Re-install the battery. 5. Plug the power cord and turn ON the computer. 6. Hold down the key during the boot process and enter BIOS setup to re-enter data. P4B-FX P4B-FX Clear RTC RAM Figure 2-24 Clear RTC RAM Intel I/O Controller Hub (ICH2) CLRTC Short solder points to Clear CMOS ASUS P4B-FX motherboard user guide 2-19