Asus P4SGL-VM P4SGL-VM User Manual - Page 39
Jumpers
View all Asus P4SGL-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2.7 Jumpers The jumpers on the motherboard allow you to change some feature settings to suit your customized system configuration. Before changing any jumper setting, make sure to read the jumper descriptions and setting requirements in this section. 1. USB device wake-up (3-pin USBV1, USBV2) Set these jumpers to pins 2-3 (+5VSB) to wake up the computer using the connected USB devices. Set to pins 1-2 (+5V) to disable the USB wake-up feature. The USB device wake-up feature requires a power supply that can provide at least 1A on the +5VSB lead. If this requirement is not met, the system does not power up. The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. P4SGL-VM ® P4SGL-VM USB Device Wake Up USBV1 3 2 2 1 +5V (Default) +5VSB USBV2 2 1 +5V (Default) 3 2 +5VSB ASUS P4SGL-VM motherboard user guide 2-17