Asus P4SGL-VM P4SGL-VM User Manual - Page 43
ASUS P4SGL-VM motherboard user guide, Floppy disk drive connector 34-1 pin FLOPPY, CPU and, Chassis
View all Asus P4SGL-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3. Floppy disk drive connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug). P4SGL-VM NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. ® PIN 1 P4SGL-VM Floppy Disk Drive Connector 4. CPU and Chassis Fan Connectors (3-pin CHASFAN1, CPUFAN1, SPSFAN1) The three fan connectors support cooling fans of 350mA (4.2 Watts) or a total of 1A (12W) at +12V. Orient the fans so that the heat sink fins allow air flow to go across the onboard heat sinks instead of the expansion slots. The fan wiring and plug may vary depending on the fan manufacturer. Connect the fan cable to the connector matching the black wire to the ground pin. Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! CHASFAN1 P4SGL-VM GND +12V Rotation CPUFAN1 GND +12V Rotation SPSFAN1 ® GND +12V NC P4SGL-VM 12-Volt Cooling Fan Power ASUS P4SGL-VM motherboard user guide 2-21