Asus P4T-E Motherboard DIY Troubleshooting Guide - Page 20

3. HARDWARE SETUP 3) Manual CPU Ratio Settings (SW1 Switches 1-4) Set SW1 switches (7-10) to use the clock multiplier to coordinate the ratio of bus speeds with CPU settings. Set the DSW switches according to the internal speed of your processor and the bus frequency. IMPORTANT: 1. To use this feature, JEN must be set to Jumper Mode, [1-2]. (See 1, JumperFree™ Mode (JEN) in 3, HARDWARE SETUP.) 2. When JumperFree mode is enabled, use BIOS setup in place of these switches. (Set Operating Frequency Setting to User Define under 4.4 Advanced Menu in BIOS Setup so you can set the CPU Frequency.) 3. H/W SETUP Motherboard Settings P4T-E P4T-E CPU Frequency Multiple Selection SW1 ON ON ON ON 1 2 3 4 5 6 7 8 9 10 8.0x ON 1 2 3 4 5 6 7 8 9 10 10.0x ON 1 2 3 4 5 6 7 8 9 10 11.0x ON 1 2 3 4 5 6 7 8 9 10 12.0x ON 1 2 3 4 5 6 7 8 9 10 13.0x ON 1 2 3 4 5 6 7 8 9 10 14.0x ON 1 2 3 4 5 6 7 8 9 10 15.0x ON 1 2 3 4 5 6 7 8 9 10 16.0x ON 1 2 3 4 5 6 7 8 9 10 17.0x ON 1 2 3 4 5 6 7 8 9 10 18.0x ON 1 2 3 4 5 6 7 8 9 10 19.0x ON 1 2 3 4 5 6 7 8 9 10 20.0x ON 1 2 3 4 5 6 7 8 9 10 21.0x 1 2 3 4 5 6 7 8 9 10 22.0x 1 2 3 4 5 6 7 8 9 10 23.0x 1 2 3 4 5 6 7 8 9 10 24.0x CPU Ratio Multiplier Table Multiplier 8.0x 10.0x 11.0x 12.0x 13.0x 14.0x 15.0x 16.0x 17.0x 18.0x 19.0x 20.0x 21.0x 22.0x 23.0x 24.0x 1 [OFF] [ON] [OFF] [ON] [OFF] [ON] [OFF] [ON] [OFF] [ON] [OFF] [ON] [OFF] [ON] [OFF] [ON] 2 [OFF] [OFF] [ON] [ON] [OFF] [OFF] [ON] [ON] [OFF] [OFF] [ON] [ON] [OFF] [OFF] [ON] [ON] 3 [OFF] [OFF] [OFF] [OFF] [ON] [ON] [ON] [ON] [OFF] [OFF] [OFF] [OFF] [ON] [ON] [ON] [ON] 4 [OFF] [OFF] [OFF] [OFF] [OFF] [OFF] [OFF] [OFF] [ON] [ON] [ON] [ON] [ON] [ON] [ON] [ON] 20 ASUS P4T-E User's Manual