Asus P5GZ-MX Motherboard Installation Guide - Page 65
DRAM Frequency [Auto], CPU Frequency [200] - ddr2 800
View all Asus P5GZ-MX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
The following item appears only when you set the AI Overclocking item to [Manual]. CPU Frequency [200] Displays the frequency sent by the clock generator to the system bus. The value of this item is auto-detected by the BIOS. The values range from 100 to 450. FSB/CPU External Frequency Synchronization Front Side Bus FSB 1066 FSB 800 FSB 533 CPU External Frequency 266 MHz 200 MHz 133 MHz You need to install an additional graphics card and Intel Core™ 2 processor to run at FSB 1066MHz. DRAM Frequency [Auto] Allows you to set the DDR2 operating frequency. Configuration options: [Auto] [DDR2-400MHz] [DDR2-533MHz] Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting. Memory Voltage [Auto] Allows you to select the memory voltage or set it to Auto for safe mode. Configuration options: [Auto] [1.80V] [1.85V] [1.90V] [1.95V] • Selecting a very high Memory voltage may damage the component permanently! If this happens, revert to the default setting. • Selecting a very low Memory voltage may cause the system to become unstable! If this happens, revert to the default setting. ASUS P5GZ-MX 2-19