Asus P5Q Premium User Manual - Page 57

SIL5723 Serial ATA connectors [orange] 7-pin SATA_E1, SATA_E2, blue] SATA_E3, SATA_E4, Backup, Super

Page 57 highlights

5. SIL5723 Serial ATA connectors [orange] (7-pin SATA_E1, SATA_E2); [blue] (SATA_E3, SATA_E4) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives. If you installed Serial ATA hard disk drives, you can create a EZ Backup or a Super Speed configuration with the Drive Xpert Technology through the onboard Silicon Image® SIL5723 controllers. SATA_E1 (orange, Port 0) SATA_E3 (blue, Port 2) NOTE: The stickers on the SATA connectors illustrate the definition of SATA_E1-4 ports when using Drive Xpert function. Refer to section 4.3.11 for detailed application instructions. SATA_E2 (white, Port 1) SATA_E4 (white, Port 3) • The SATA_E1-4 connectors are for SATA hard drives only. ATAPI device is not supported. • Make necessary backup before using the Drive Xpert function: All original data of the SATA_E2 (white, port1) and SATA_E4 (white, port 3) hard drive will be erased for EZ Backup setup. All original data of the two hard drives will be erased for Super Speed setup. • Before using the Drive Xpert technology, make sure that you have connected the SATA signal cables and installed SATA hard disk drives. • Install the Marvell® 61xx SATA Driver before using the SATA_E1-4 connectors. Refer to section 4.2.2 Drivers menu for details. • Drive Xpert function is available only when the hard disk drives connected to SATA_E1-4 are set as data drives. • When using only one hard disk in Normal Mode, connect the hard disk to the SATA_E1 (orange, port 0) or the SATA_E3 (blue, port 2) connector on the motherboard. Refer to section 3.8 Tools menu and 4.3.11 ASUS Drive Xpert Utility- SteelVine Manager for detailed Drive Xpert technology instructions. ASUS P5Q Premium 2-31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

ASUS
P5Q Premium
2-31
5.
SIL5723 Serial ATA connectors [orange] (7-pin SATA_E1, SATA_E2);
[blue] (SATA_E3, SATA_E4)
These connectors are for the Serial ATA signal cables for Serial ATA hard
disk drives. If you installed Serial ATA hard disk drives, you can create a
EZ
Backup
or a
Super Speed
configuration with the Drive Xpert Technology
through the onboard Silicon Image
®
SIL5723 controllers.
Before using the Drive Xpert technology, make sure that you have
connected the SATA signal cables and installed SATA hard disk drives.
Install the
Marvell
®
61xx SATA Driver
before using the SATA_E1–4
connectors. Refer to section
4.2.2 Drivers menu
for details.
Drive Xpert function is available only when the hard disk drives connected
to SATA_E1–4 are set as data drives.
When using only one hard disk in
Normal Mode
, connect the hard disk to
the SATA_E1 (orange, port 0) or the SATA_E3 (blue, port 2) connector on
the motherboard.
Refer to section
3.8 Tools menu
and
4.3.11 ASUS Drive Xpert Utility—
SteelVine Manager
for detailed Drive Xpert technology instructions.
The SATA_E1–4 connectors are for SATA hard drives only. ATAPI device is
not supported.
Make necessary backup before using the
Drive Xpert
function:
All original data of the SATA_E2 (white, port1) and SATA_E4 (white, port 3)
hard drive will be erased for
EZ Backup
setup.
All original data of the two hard drives will be erased for
Super Speed
setup.
SATA_E1 (orange, Port 0)
SATA_E2 (white, Port 1)
SATA_E3 (blue, Port 2)
SATA_E4 (white, Port 3)
NOTE:
The stickers on the SATA connectors
illustrate the definition of SATA_E1–4 ports when
using Drive Xpert function. Refer to section
4.3.11
for detailed application instructions.