Asus P5VD2-VM SE User Manual - Page 70

Onboard VGA Frame Buffer Size [128MB]

Get Asus P5VD2-VM SE PDF manuals and user guides View all Asus P5VD2-VM SE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

DRAM Timing [Auto] When this item is set to [Auto], [Turbo], or [Ultra], the DRAM timing parameters are set according to the DRAM SPD (Serial Presence Detect), Turbo, or Ultra. When set to [Manual], you can manually set the DRAM timing parameters. The Configuration options: [Manual] [Auto] [Turbo] [Ultra] The following items appear when the DRAM Timing item is set to [Manual]. DRAM CAS# Latency [4] Controls the latency between the SDRAM read command and the time the data actually becomes available. Configuration options: [2] [3] [4] [5] Precharge to Active(Trp) [4T] Configuration options: [2T] ~ [5T] Active to Precharge(Tras) [7T] Configuration options: [5T] ~ [20T] Active to CMD (Trcd) [4T] Configuration options: [2T] ~ [5T] AGP & P2P Bridge Configuration AGP & P2P Bridge Configuration Primary Graphics Adapter [PCIE] AGP Aperture Size [128MB] AGP 3.0 Mode [8X] OnChip VGA Configuration Manual DRAM Frequency Setting or AUTO by SPD Primary Graphics Adapter [PCIE] Allows selection of the graphics controller to use as primary boot device. Configuration options: [PCI] [Onboard VGA] [PCIE] AGP Aperture Size [128MB] Configuration options: [32MB] [64MB] [128MB] [256MB] [512MB] [1GB] AGP 3.0 Mode [8X] Configuration options: [8X] [4X] OnChip VGA Configuration Onboard VGA Frame Buffer Size [128MB] Allows you to set the onboard VGA Frame buffer size. Configuration options: [8MB] [16MB] [32MB] [64MB] [128MB] [256MB] 2-22 Chapter 2: BIOS setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
2-22
Chapter 2: BIOS setup
DRAM Timing [Auto]
When this item is set to [Auto], [Turbo], or [Ultra], the DRAM timing parameters are
set according to the DRAM SPD (Serial Presence Detect), Turbo, or Ultra.
When set to [Manual], you can manually set the DRAM timing parameters. The
Configuration options: [Manual] [Auto] [Turbo] [Ultra]
The following items appear when the DRAM Timing item is set to [Manual].
DRAM CAS# Latency [4]
Controls the latency between the SDRAM read command and the time the data
actually becomes available.
Configuration options: [2] [3] [4] [5]
Precharge to Active(Trp) [4T]
Configuration options: [2T] ~ [5T]
Active to Precharge(Tras) [7T]
Configuration options: [5T] ~ [20T]
Active to CMD (Trcd) [4T]
Configuration options: [2T] ~ [5T]
AGP & P2P Bridge Configuration
AGP & P2P Bridge Configuration
Primary Graphics Adapter
[PCIE]
AGP Aperture Size
[128MB]
AGP 3.0 Mode
[8X]
OnChip VGA Configuration
Manual DRAM Frequency
Setting or AUTO by
SPD
Primary Graphics Adapter [PCIE]
Allows selection of the graphics controller to use as primary boot device.
Configuration options: [PCI] [Onboard VGA] [PCIE]
AGP Aperture Size [128MB]
Configuration options:
[32MB] [64MB] [128MB] [256MB] [512MB] [1GB]
AGP 3.0 Mode [8X]
Configuration options: [8X] [4X]
OnChip VGA Configuration
Onboard VGA Frame Buffer Size [128MB]
Allows you to set the onboard VGA Frame buffer size.
Configuration options: [8MB] [16MB] [32MB] [64MB] [128MB] [256MB]