Asus P6X58-E WS User Guide - Page 128
Deleting a RAID set, Capacity, Create Volume, Delete RAID Volume
View all Asus P6X58-E WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
5. Use the up/down arrow key to select a drive, and then press to select. A small triangle marks the selected drive. Press after completing your selection. 6. Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10 and 5 only), and then press . The available stripe size values range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. 7. When the Capacity item is selected, enter the RAID volume capacity that you want and press . The default value indicates the maximum allowed capacity. 8. When the Create Volume item is selected, press . The following warning message appears. WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume? (Y/N): 9. Press to create the RAID volume and return to the main menu, or to go back to the CREATE VOLUME menu. Deleting a RAID set Take caution when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set 1. From the utility main menu, select 2. Delete RAID Volume and press . The following screen appears. 4-16 Chapter 4: Software support