Asus P6X58-E WS User Guide - Page 46
Onboard LEDs, Standby power LED, POST State LEDs
View all Asus P6X58-E WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
2.6 Onboard LEDs 1. Standby power LED The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. 2. POST State LEDs POST State LEDs check key components (CPU, DRAM, VGA card, and HDD) in sequence during motherboard booting process. If an error is found, the LED next to the error device will continue lighting until the problem is solved. This user-friendly design provides an intuitive way to locate the root problem within seconds. You may disable the POST State LEDs in BIOS. Refer to section 3.7.2 Boot Setting Configuration for details. 2-22 Chapter 2: Hardware information