Asus P6X58-E WS User Guide - Page 86
High TDP Turbo Mode [Auto], BCLK Frequency [XXX], QPI Link Data Rate [Auto]
View all Asus P6X58-E WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
3.4.5 High TDP Turbo Mode [Auto] Configuration options: [Auto] [Enabled] [Disabled] The following two items appear only when you set the Ai Overclock Tuner item to [Manual], [D.O.C.P.] or [X.M.P.]. 3.4.6 BCLK Frequency [XXX] Allows you to adjust the Internal Base Clock (BCLK). Use the and keys to adjust the value. You can also type the desired value using the numeric keypad. The values range from 100 to 500. 3.4.7 PCIE Frequency [XXX] Allows you to set the PCI Express frequency. Use the and keys to adjust the PCIE frequency. The values range from 100 to 200. 3.4.8 DRAM Frequency [Auto] Allows you to set the DDR3 operating frequency. Configuration options: [Auto] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-1600MHz] [DDR3-1866MHz] [DDR3-2133MHz] [DDR3-2400MHz] The DRAM Frequency configuration options vary with the BCLK Frequency item settings. Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting. 3.4.9 UCLK Frequency [Auto] Allows you to set the Uncore Clock Ratio (UCLK). Configuration options: [Auto] [1600MHz] [1733MHz] [1866MHz] [2000MHz] [2133MHz] [2266MHz] [2400MHz] [2533MHz] [2666MHz] [2800MHz] [2933MHz] [3066MHz] [3200MHz] [3333MHz] [3466MHz] The UCLK Frequency configuration options vary with the DRAM Frequency item settings. 3.4.10 QPI Link Data Rate [Auto] Allows you to set the QuickPath Interconnect (QPI) frequency. Configuration options: [Auto] [4800MT/s] [5866MT/s] [6400MT/s] 3-16 Chapter 3: BIOS setup