Asus Pundit-R350 Pundit-R350 User''s Manual for English Edition - Page 34
Installing a Serial ATA hard disk drive
View all Asus Pundit-R350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
2.8.2 Installing a Serial ATA hard disk drive To install a Serial ATA hard disk drive: 1. Follow steps 1 to 4 of the previous section. 2. Connect one end of the supplied 7-pin SATA cable to the connector at the back of the Serial ATA cable drive, then connect the other end to the SATA connector on the motherboard. See page 68 for the location of the Serial ATA connector. 3. For Serial ATA HDDs with a 4-pin power connector: Connect a 4-pin (female) power plug from the power supply unit (PSU) to the 4-pin (male) power connector at the back of the drive. For Serial ATA HDDs without a 4-pin power connector: Use the supplied SATA power cable. Connect a 4-pin plug (female) from the PSU to the 4-pin (male) plug of the SATA power cable. Connect the 15-pin SATA power plug to the power connector at the back of the drive. 15-pin 4-pin (male) Serial ATA power cable 34 Chapter 2: Basic installation