Asus ROG MAXIMUS XI GENE Users Manual English - Page 33
Internal connectors, Intel, Z390 Serial ATA 6 Gb/s connectors 7-pin SATA6G_1-4
View all Asus ROG MAXIMUS XI GENE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
1.1.9 Internal connectors 1. Intel® Z390 Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-4) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z390 chipset. Chapter 1 • These connectors are set to [AHCI] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode Selection item in the BIOS to [Intel RST Premium With Intel Optane System Acceleration (RAID)]. • For more information on configuring your RAID sets, please refer to the RAID Configuration Guide which you can find at https://www.asus.com/support. ROG MAXIMUS XI GENE 1-17