Asus ROG MAXIMUS Z790 FORMULA Users Manual English - Page 29
Addressable Gen2 header, Alteration PCIe Mode switch, WS2812B LED strips or WS2812B based LED strips.
View all Asus ROG MAXIMUS Z790 FORMULA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 1 12. Addressable Gen2 header The Addressable Gen2 header allows you to connect individually addressable RGB WS2812B LED strips or WS2812B based LED strips. ADD GEN2_1 ADD GEN2_2 ADD GEN2_3 Before you install or remove any component, ensure that the power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. • The Addressable Gen2 header supports WS2812B addressable RGB LED strips (5V/Data/Ground), with a maximum power rating of 3A (5V), and the addressable headers on this board can handle a combined maximum of 500 LEDs. • Actual lighting and color will vary with LED strip. • If your LED strip does not light up, check if the addressable RGB LED strip is connected in the correct orientation, and the 5V connector is aligned with the 5V header on the motherboard. • The addressable RGB LED strip will only light up when the system is powered on. 13. Alteration PCIe Mode switch The Alteration PCIe Mode switch allows you to switch the PCIe signal which comes from the CPU from between Gen4 or Gen3 for the PCIe slot. ALT_PCIE_MODE • When the Alteration PCIe Mode switch is set to Auto, the PCIe signal from the CPU will be the default setting. • When the Alteration PCIe Mode switch is set to 1st step, the PCIe signal from the CPU will be Gen4, and LED1 will light up green. • When the Alteration PCIe Mode switch is set to 2nd step, the PCIe signal from the CPU will be Gen3, and LED2 will light up yellow. • The nearby LEDs indicate which PCIe mode is currently selected. Motherboard User Manual 1-13