Asus RS160-E4 User Guide - Page 115
Managing Arrays, Viewing volume properties
UPC - 610839648061
View all Asus RS160-E4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
6.2.4 Managing Arrays The LSI Corporation MPT Setup Utility allows you to perform other tasks related to configuring and maintaining IM and IME volumes. Refer to this section to view volume properties, manage the hot spare disk, synchronize the array, activate the array, and delete the array. Viewing volume properties To view volume properties: 1. On the main menu, select RAID Properties. LSI Corp Config Utility v6.18.01.00 (2007.08.08) Adapter Properties -- SAS1064E Adapter PCI Slot PCI Address(Bus/Dev/Func) MPT Firmware Revision SAS Address NVDATA Version Status Boot Order Boot Support RAID Properties SAS Topology Advanced Adapter Properties SAS1064E 20 07:00:00 1.22.01.00-IR 50000065:41236545 2B.00 Enabled 0 (Enabled BIOS & OS) Esc = Exit Menu F1/Shift+1 = Help Enter = Select Item -/+/Enter = Change Item 2. The View Array screen appears. Here you can view properties of the RAID array(s) created. If you have configured a hot spare, it will also be listed. If you created more than one array, you may view the next array by pressing . LSI Corp Config Utility View Array -- SAS1064E Array Identifier Type Scan Order Size(MB) Status Manage Array Slot Device Identifier Num 0 SEAGATE ST373454SS 1 SEAGATE ST373454SS v6.18.01.00 (2007.08.08) 1 of 1 LSILOGICLogical Volume 3000 IM 0 34332 Optimal RAID Hot Disk Spr 0003 Yes NO 0003 Yes NO Drive Pred Status Fail Primary Yes Secondary No Size (MB) 34332 34332 Esc = Exit Menu F1/Shift+1 = Help Enter=Select Item Alt+N=Next Array C = Create an array R = Refresh Display ASUS RS160-S5/PX4 6-11