Asus RS160-E4 User Guide - Page 58
Fan control setting 3-pin CPUFAN_SET1, CHAFAN_SET1, Onboard storage setting 3-pin SAS_EN1
UPC - 610839648061
View all Asus RS160-E4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
4. Fan control setting (3-pin CPUFAN_SET1, CHAFAN_SET1) These jumpers allow you to switch for fan pin selection. The CPUFAN_SET1 jumper is for the CPU fans control and CHAFAN_SET1 is for the other fans control including front fans, rear fans and FB-DIMM fans. Set to pins 1-2 for 4-pin fans or pins 2-3 for 3-pin fans. FAN_SET1 FAN_SET2 ® 12 23 Balanced (Default) DSEB-DG/SAS/RS160-S5 FAN setting DC FAN • If you use a 4-pin fan but set the jumper to pin 2-3, the fan you installed may not work. • If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan control will not work and the fan you installed will always run at full speed. 5. Onboard storage setting (3-pin SAS_EN1) This jumper allows you to enable or disable the onboard LSI1068 SAS controller. Set the jumper to pins 1-2 to enable the SAS function (default). ® DSEB-DG/SAS/RS160-S5 SAS setting SAS_EN1 12 23 Enable (Default) Disable 4-6 Chapter 4: Motherboard information