Home » Asus Manuals » Desktops » Asus RS160-E4 » Manual Viewer

Asus RS160-E4 User Guide - Page 64

USB connector 10-1 pin USB34, CPU and system fan connectors 4-pin CPU_FAN1/2, REAR_FAN1/2

UPC - 610839648061

Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

7. USB connector (10-1 pin USB34) This connector is for USB 2.0 ports. Connect the USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. This USB connector complies with USB 2.0 specification that supports up to 480 Mbps connection speed. Power USB PortB(-) USB PortB(+) GND NC ® USB34 PIN1 DSEB-DG/SAS/RS160-S5 USB connector Power USB PortA(-) USB PortA(+) GND The USB port module is purchased separately. 8. CPU and system fan connectors (4-pin CPU_FAN1/2, REAR_FAN1/2, FRNT_FAN1/2/3/4) The fan connectors support cooling fans of 350 mA ~ 740 mA (8.88 W max.) or a total of 3.15 A ~ 6.66 A (53.28 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. CPU_FAN1 CPU_FAN1 CPU_FAN2 REAR_FAN1 REAR_FAN2 GND FAN Power FAN Speed PWM Control PWM Control FAN Speed FAN Power GND FBD_FAN1 CPU_FAN2 FRNT_FAN1 FRNT_FAN2 FRNT_FAN3 FRNT_FAN4 REAR_FAN1 REAR_FAN2 PWM Control FAN Speed FAN Power GND FBD_FAN1 GND FAN Power FAN Speed PWM Control ® PWM Control FAN Speed FAN Power GND GND FAN Power FAN Speed PWM Control GND FAN Power FAN Speed PWM Control FRNT_FAN1 GND FAN Power FAN Speed PWM Control FRNT_FAN2 GND FAN Power FAN Speed PWM Control FRNT_FAN3 FRNT_FAN4 DSEB-DG/SAS/RS160-S5 Fan connectors DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! 4-12 Chapter 4: Motherboard information

Section	Page
Contents	3
Notices	7
Safety information	8
About this guide	9
Chapter 1: Product introduction	11
1.1 System package contents	12
1.2 Serial number label	12
1.3 System specifications	13
1.4 Front panel features	15
1.5 Rear panel features	15
1.6 Internal features	16
1.7 LED information	17
1.7.1 Front panel LEDs	17
1.7.2 LAN (RJ-45) LEDs	17
1.7.3 HDD status LED	18
Chapter 2: Hardware setup	19
2.1 Chassis cover	20
2.1.1 Removing the front cover	20
2.1.2 Removing the rear cover	22
2.1.3 Installing the top cover	23
2.2 Central Processing Unit (CPU)	24
2.2.1 Installing the CPU	24
2.2.2 Installing the CPU heatsink and airduct	27
2.3 System memory	28
2.3.1 Overview	28
2.3.2 Memory mirroring and sparing technology	30
2.3.3 Installing a DIMM	33
2.3.4 Removing a DIMM	33
2.4 Hard disk drives	34
2.5 Expansion slot	36
2.5.1 Installing an expansion card to the riser card bracket	36
2.5.2 Reinstalling the riser card bracket	37
2.5.3 Configuring an expansion card	39
2.6 Cable connections	40
2.7 SAS backplane cabling	41
2.8 Removable components	42
2.8.1 System fans	42
2.8.2 Power supply module	45
2.8.3 Optical drive	46
2.8.4 Motherboard	47
Chapter 3: Installation options	49
3.1 Rackmount rail kit items	50
3.2 Rack rails assembly	50
3.3 Attaching the rails to the rack	51
3.4 Rackmounting the server	52
Chapter 4: Motherboard Info	53
4.1 Motherboard layout	54
4.2 Jumpers	56
4.3 Internal connectors	60
Chapter 5: BIOS setup	69
5.1 Managing and updating your BIOS	70
5.1.1 Creating a bootable floppy disk	70
5.1.2 AFUDOS utility	71
5.1.3 ASUS CrashFree BIOS 3 utility	74
5.2 BIOS setup program	75
5.2.1 BIOS menu screen	76
5.2.2 Menu bar	76
5.2.3 Navigation keys	76
5.2.4 Menu items	77
5.2.5 Sub-menu items	77
5.2.6 Configuration fields	77
5.2.7 Pop-up window	77
5.2.8 Scroll bar	77
5.2.9 General help	77
5.3 Main menu	78
5.3.1 System Date [Day xx/xx/xxxx]	78
5.3.2 System Time [xx:xx:xx]	78
5.3.3 Floppy A [Disabled]	78
5.3.4 IDE Configuration	79
5.3.5 Primary IDE Master/Slave	80
5.3.6 System Information	81
5.4 Advanced menu	83
5.4.1 CPU Configuration	83
5.4.2 Chipset Configuration	85
5.4.3 PCI/PnP Configuration	89
5.4.4 USB Configuration	91
5.4.5 Peripheral Configuration	92
5.4.6 ACPI Configuration	93
5.4.7 Power On Configuration	94
5.4.8 Hardware Monitor	95
5.5 Server menu	97
5.6 Security	99
5.7 Boot menu	101
5.7.1 Boot Device Priority	101
5.7.2 Boot Settings Configuration	102
5.8 Exit menu	103
Chapter 6: RAID configuration	105
6.1 Setting up RAID	106
6.1.1 RAID definitions	106
6.1.2 Installing hard disk drives	106
6.2 LSI Corporation MPT Setup Utility	107
6.2.1 Integrated Mirroring (IM) volume	107
6.2.2 Integrated Mirroring Enhanced (IME) volume	111
6.2.3 Integrated Striping (IS) volume	113
6.2.4 Managing Arrays	115
6.2.5 Viewing SAS Topology	119
6.2.6 Global Properties	120
Chapter 7: Driver installation	123
7.1 RAID driver installation	124
7.1.1 Creating a RAID driver disk	124
7.1.2 Installing the RAID controller driver	127
7.2 Intel® chipset device installation	134
7.3 LAN driver installation	137
7.4 VGA driver installation	141
7.5 Management applications and utilities installation	143
7.5.1 Running the support CD	143
7.5.2 Drivers menu	143
7.5.3 Management Software menu	144
7.5.4 Utilities menu	144

Match case Limit results 1 per page

Chapter 4: Motherboard information

4-12

USB connector (10-1 pin USB34)

This connector is for USB 2.0 ports. Connect the USB module cable to

this connector, then install the module to a slot opening at the back of the

system chassis. This USB connector complies with USB 2.0 speciﬁcation that

supports up to 480 Mbps connection speed.

The USB port module is purchased separately.

DSEB-DG/SAS/RS160-S5 USB connector

USB34

PIN1

Power

USB PortA(-)

USB PortA(+)

GND

Power

USB PortB(-)

USB PortB(+)

GND

CPU and system fan connectors (4-pin CPU_FAN1/2, REAR_FAN1/2,

FRNT_FAN1/2/3/4)

The fan

connectors support cooling fans of 350 mA ~ 740 mA (8.88 W max.)

or a total of 3.15 A ~ 6.66 A (53.28 W max.) at +12V. Connect the fan cables

to the fan connectors on the motherboard, making sure that the black wire of

each cable matches the ground pin of the connector.

DO NOT forget to connect the fan cables to the fan connectors. Insufﬁcient air

ﬂow inside the system may damage the motherboard components. These are

not jumpers! DO NOT place jumper caps on the fan connectors!

DSEB-DG/SAS/RS160-S5 Fan connectors

CPU_FAN1

CPU_FAN2

GND

FAN Power

FAN Speed

PWM Control

REAR_FAN1

REAR_FAN2

FRNT_FAN1

GND

FAN Power

FAN Speed

PWM Control

CPU_FAN1

CPU_FAN2

REAR_FAN1

REAR_FAN2

FRNT_FAN1

FRNT_FAN2

FRNT_FAN3

FRNT_FAN4

GND

FAN Power

FAN Speed

PWM Control

GND

FAN Power

FAN Speed

PWM Control

GND

FAN Power

FAN Speed

PWM Control

GND

FAN Power

FAN Speed

PWM Control

FRNT_FAN2

GND

FAN Power

FAN Speed

PWM Control

FRNT_FAN3

GND

FAN Power

FAN Speed

PWM Control

FRNT_FAN4

FBD_FAN1

GND

FAN Power

FAN Speed

PWM Control

FBD_FAN1