Asus RS161-E4 PA2 User Guide - Page 40
Lift the metal bracket, then set
View all Asus RS161-E4 PA2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
6. Remove two metal bracket screws and screws on the other side of the drive. Keep the screws for later use. 7. Pull the metal bracket to the direction of the arrow until its pegs disengage from the drive holes. 8. Lift the metal bracket, then set aside. 9. Push the drive inward, then lift it out from the chassis. 2-24 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-24
6. Remove two metal bracket screws and screws on the other side of the
drive. Keep the screws for later use.
7. Pull the metal bracket to the
direction of the arrow until its
pegs disengage from the drive
holes.
8. Lift the metal bracket, then set
aside.
9. Push the drive inward, then lift it
out from the chassis.