Asus RS161-E4 PA2 User Guide - Page 53

VGA Graphics controller setting 3-pin VGA_EN1 - bios update

Get Asus RS161-E4 PA2 PDF manuals and user guides View all Asus RS161-E4 PA2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

6. BIOS Recovery (3-pin RECOVERY1) This jumper allows you to recover your original BIOS from a floppy disk in case the BIOS codes and data are corrupted. To recover the BIOS: 1. Turn OFF your computer and unplug the power cord. 2. Move the jumper cap from pins 1-2 (default) to pins 2-3. 3. Insert a floppy disk with the original or updated BIOS file. 4. Plug the power cord and turn ON the computer. 5. The system searches for the BIOS file in the floppy then reflashes the BIOS. 6. When finished, shut down your computer. 7. Replace the jumper cap from pins 2-3 to pins 1-2. 8. Reboot your computer. 9. Hold down the key during the boot process and enter BIOS setup to re-enter data. R KFN4-DRE RECOVERY1 12 23 Normal BIOS Recovery (Default) KFN4-DRE BIOS Recovery Setting 7. VGA Graphics controller setting (3-pin VGA_EN1) These jumpers allow you to enable or disable the onboard ATI Rage XL video graphics controller. Set to pins 1-2 to enable the video graphics controller. R KFN4-DRE KFN4-DRE VGA_EN1 Setting ASUS RS161-E4/PA2 VGA_EN1 2 1 Enabled (Default) 3 2 Disabled 4-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
ASUS RS161-E4/PA2
4-7
7. VGA Graphics controller setting (3-pin VGA_EN1)
These jumpers allow you to enable or disable the onboard ATI Rage XL
video graphics controller. Set to pins 1-2 to enable the video graphics
controller.
6. BIOS Recovery (3-pin RECOVERY1)
This jumper allows you to recover your original BIOS from a floppy disk in
case the BIOS codes and data are corrupted.
To recover the BIOS:
1.
Turn OFF your computer and unplug the power cord.
2.
Move the jumper cap from pins 1-2 (default) to pins 2-3.
3.
Insert a floppy disk with the original or updated BIOS file.
4.
Plug the power cord and turn ON the computer.
5.
The system searches for the BIOS file in the floppy then reflashes
the BIOS.
6.
When finished, shut down your computer.
7.
Replace the jumper cap from pins 2-3 to pins 1-2.
8.
Reboot your computer.
9.
Hold down the <Del> key during the boot process and enter BIOS
setup to re-enter data.
KFN4-DRE
KFN4-DRE BIOS Recovery Setting
RECOVERY1
(Default)
Normal
BIOS Recovery
12
23
KFN4-DRE
KFN4-DRE VGA_EN1 Setting
VGA_EN1
Enabled
Disabled
(Default)
1
2
2
3