Asus V6-M4A3000E User Manual - Page 52
ATX power connectors 24-pin EATXPWR, 4-pin ATX12V
View all Asus V6-M4A3000E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
10. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. ATX12V EATXPWR M4A78LT-M LE +12V DC +12V DC PIN 1 GND +3 Volts GND +12 Volts +12 Volts +5V Standby Power OK GND +5 Volts GND +5 Volts GND +3 Volts +3 Volts PIN 1 GND +5 Volts +5 Volts +5 Volts -5 Volts GND GND GND PSON# GND -12 Volts +3 Volts M4A78LT-M LE ATX power connectors • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 300 W. • DO NOT forget to connect the 4-pin ATX12V power plug; otherwise, the system will not boot. • Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • The ATX 12 V Specification 2.0-compliant (300W) PSU has been tested to support the motherboard power requirements. 3-10 Chapter 3: Motherboard info