Asus V6-M4A3000E User Manual - Page 53

PLED+ PLEDPWR GND HD_LED+ HD_LED- Ground Reset 11. System panel connector (10-1 pin F_PANEL) This connector supports several chassis-mounted functions. PLED PWRBTN F_PANEL PIN 1 M4A78LT-M LE +HDLED RESET M4A78LT-M LE System panel connector • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin +HDLED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The HD LED lights up or flashes when data is read from or written to the HDD. • ATX power button/soft-off button (2-pin PWRBTN) This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS V-series M4A3000E 3-11