Asus WL-330GE User Guide - Page 22
System requirements, 2 Device installation - support
UPC - 610839736331
View all Asus WL-330GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2.1 System requirements Before installing the ASUS Portable Wireless AP, make sure that your system/ network meets the following requirements: • An Ethernet RJ-45 port (10Base-T/100Base-TX) • At least one IEEE 802.11b/g device with wireless capability • An installed TCP/IP and Internet browser 2.2 Device installation Follow these instructions to install the ASUS Portable Wireless AP. 1. Install the device utilities from the support CD. 2. Connect the device to your computer, network hub, switch, or router. 2.2.1 Before you proceed Take note of the following guidelines before installing the ASUS Portable Wireless AP. • The length of the Ethernet cable that connects the device to the network (hub, ADSL/cable modem, router, wall patch) must not exceed 100 meters. • Place the device on a flat, stable surface as far from the ground as possible. • Keep the device clear from metal obstructions and away from direct sunlight. • Keep the device away from transformers, heavy-duty motors, fluorescent lights, microwave ovens, refrigerators, and other industrial equipment to prevent signal loss. • Install the device in a central area to provide ideal coverage for all wireless mobile devices. • Install the device at least 20cms from a person to insure that the product is operated in accordance with the RF Guidelines for Human Exposure adopted by the Federal Communications Commission. 2- Chapter 2: Hardware installation