Asus WL-330GE User Guide - Page 67
Replacing the cable connections of other, devices, Sharing Internet connection with other, computers - adapter
UPC - 610839736331
View all Asus WL-330GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
5.3 Replacing the cable connections of other devices You can also use the WL-330gE to replace your Xbox, PlayStation® 2, orset-top box network cable connection. To do this: 1. Switch the WL-330gE to Ethernet adapter mode using the mode switch. (Default SSID: ANY) 2. Place the WL-330gE nearest the AP you wish to connect, then turn on the device. 3. Connect one end of the supplied RJ-45 cable to the Ethernet port of the device and the other end to the Xbox, PlayStation® 2, or set-top box Ethernet port. 4. Set the IP address of the Xbox, PlayStation® 2, or set-top box toestablish connection to the local network. Verify your connection. Make sure the WL-330gE MAC cloning feature is enabled when using the device in this setup. Use the Wireless Setting Utility to enable MAC cloning. See page 3-24 for details on MAC cloning. 5.4 Sharing Internet connection with other computers Refer to the typical network configuration below and a table on the next page for information on Internet connection sharing with other computers in your office or home network. ˝ Internet ADSL/Cable modem WL-330gE Wireless computer Use the mode switch to set the WL-330gE to AP mode before sharing an Internet connection with other computers in your network. ASUS WL-330gE Portable Wireless Access Point 5-