Asus WL-330GE User Guide - Page 71

Problem I can not access the ASUS Portable Wireless AP web configuration page. Where can I get a firmware file to upgrade the ASUS Portable Wireless AP? The ASUS Portable Wireless AP Power LED continuously blinks for more than a minute. A wireless client wants to connect to the ASUS Portable Wireless AP but can not get the correct IP from the DHCP server. (The ASUS Portable Wireless AP has an enabled DHCP.) Action To access the ASUS Portable Wireless AP web configuration page, your computer must have the same subnet as that of the ASUS Pocket Wireless AP. Adjust your network if your computer's subnet does not match that of the ASUS Portable Wireless AP. The default IP address of the ASUS Portable Wireless AP is "192.168.1.1". In special cases, when the ASUS Portable Wireless AP in Ethernet adapter mode joins an AP network with the same IP address, reset the ASUS Portable Wireless AP to access the Web Configuration utility again. You may download the latest firmware file from the ASUS website (www.asus.com). Use the Firmware Upgrade page in the Web Configuration utility to update the ASUS Portable Wireless AP firmware. Turn off the ASUS Portable Wireless AP. Turn the device again and observe if the Power LED stops blinking. If the blinking continues, you need to restore the ASUS Portable Wireless AP firmware. Use the Firmware Restoration utility to restore or update the ASUS Portable Wireless AP firmware. Make sure the DHCP server is working properly. Some DHCP servers can only assign one IP address at a time. In this case, assign a fixed IP address to your ASUS Portable Wireless AP. ASUS WL-330gE Portable Wireless Access Point A-