Asus Z8PE-D18 User Manual - Page 144
mkdir /mnt/driver, mount /dev/fd0 /mnt/driver, sh replace_ahci.sh, reboot
UPC - 610839170692
View all Asus Z8PE-D18 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
5. Insert the Red Hat® Enterprise RAID driver disk to the floppy disk drive, select OK, then press . Insert Driver Disk Insert your driver disk into /dev/fd0 and press "OK" to continue. OK Back The drivers for the RAID controller are installed to the system. 6. When asked if you will load additional RAID controller drivers, select No, then press . More Driver Disks? Do you wish to load any more driver disks? Yes No 7. Follow the onscreen instructions to finish the OS installation. 8. If you are installing RHEL AS5, when the installation is completed, DO NOT click Reboot. Press + + to switch to the command-line interface from graphic user interface, and execute replace_ahci.sh following the instruction of step 9. 9. Type the following commands when using a Legacy floppy. mkdir /mnt/driver mount /dev/fd0 /mnt/driver cd /mnt/driver sh replace_ahci.sh reboot 6-10 Chapter 6: Driver installation