Asus Z8PE-D18 User Manual - Page 45
iBTN RAID setting 3-pin IBTN_SEL1, the LSI Mega RAID 5 supported by Intel
UPC - 610839170692
View all Asus Z8PE-D18 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
6. iBTN RAID setting (3-pin IBTN_SEL1) This jumper allows you to select the RAID configuration utility to use when you create disk arrays. Place the jumper caps on pins 1-2 if you install a PIKE RAID card to the motherboard and want to use the LSI Logic MPT Setup Utility (default). Or you can place the jumper caps on pins 2-3 to create the LSI Mega RAID 5 supported by Intel® ICH10R SATA controller. • LSI Logic MPT Setup Utility is available only when you install a PIKE RAID card. • LSI Mega RAID 5 fucntion is available only when you place the iBTN to I_BTN1 slot and install an optional ASUS PIKE RAID card. ASUS Z8PE-D18 2-27
ASUS Z8PE-D18
2-27
6.
iBTN RAID setting (3-pin IBTN_SEL1)
This jumper allows you to select the RAID configuration utility to use when
you create disk arrays. Place the jumper caps on pins 1–2 if you install a
PIKE RAID card to the motherboard and want to use the LSI Logic MPT
Setup Utility (default). Or you can place the jumper caps on pins 2–3 to create
the LSI Mega RAID 5 supported by Intel
®
ICH10R SATA controller.
•
LSI Logic MPT Setup Utility is available only when you install a PIKE RAID
card.
•
LSI Mega RAID 5 fucntion is available only when you place the iBTN to
I_BTN1 slot and install an optional ASUS PIKE RAID card.