Asus Z8PH-D12 SE QDR -Manual - Page 128
RAID Level, Recovery, Disks, SELECT DISKS, Create Volume, CREATE VOLUME
View all Asus Z8PH-D12 SE QDR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
2. Enter a name for the recovery set and press . 3. When the RAID Level item is selected, press the up/down arrow key to select Recovery, and then press . 4. When the Disks item is selected, press to select the hard disk drives you want to include in the recovery set. The SELECT DISKS screen appears. Port Drive Model 0 ST3160812AS 1 ST3160812AS 2 ST3160812AS 3 ST3160812AS [ SELECT DISKS ] Serial # 9LS0HJA4 9LS0F4HL 3LS0JYL8 9LS0BJ5H Size 149.0GB 149.0GB 149.0GB 149.0GB Status Non-RAID Disk Non-RAID Disk Non-RAID Disk Non-RAID Disk Select 1 Master and 1 Recovery disk to create volume. [↑↓]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done 5. Use the up/down arrow key to select a drive, press to select a Master disk, and then press to select a Recovery disk. A small triangle marks the selected drive. Press after completing your selection. 6. When the Sync item is selected, use the up/down arrow key to select a sync option that you want and press . 7. When the Create Volume item is selected, press . The following warning message appears. WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume? (Y/N): 8. Press to create the recovery set and return to the main menu, or to go back to the CREATE VOLUME menu. If a recovery set is created, you cannot add more RAID sets even when you have more non-RAID disks installed in your system. 5-28 Chapter 5: RAID configuration