Asus Z8PH-D12 SE QDR -Manual - Page 86
PCIPnP Configuration
View all Asus Z8PH-D12 SE QDR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
4.4.5 PCIPnP Configuration The PCIPnP Configuration menu items allow you to change the advanced settings for PCI/PnP devices. Take caution when changing the settings of the PCI/PnP Configuration menu items. Incorrect field values can cause the system to malfunction. Advanced BIOS SETUP UTILITY Advanced PCI/PnP Settings WARNING: Setting wrong values in below sections may cause system to malfunction. Plug And Play O/S [No] PCI Option ROM Scan Order [Bus 0 First] Onboard Option ROM Priority [High] Onboard LAN1 Chip [Enabled] Onboard LAN2 Chip [Enabled] Onboard LAN1 Boot [PXE] Onboard LAN2 Boot [PXE] NO: lets the BIOS configure all the devices in the system. YES: lets the operating system configure Plug and Play (PnP) devices not required for boot if your system has a Plug and Play operating system. ←→ Select Screen ↑↓ Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2009, American Megatrends, Inc. Plug And Play O/S [No] When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. Configuration options: [No] [Yes] PCI Option ROM Scan Order [Bus 0 First] Allows you to select the PCI option ROM scanning order. The scanning of the option ROM will start from the lowest bus, device, fucntion number if you set this item to [Bus 0 First]; the scanning starts from the highest bus, device, function number if you set this item to [Bus N First]. Configuration options: [Bus 0 First] [Bus N First] Onboard Option ROM Priority [High] Allows you to select the onboard option ROM priority. Configuration options: [Normal] [High] Onboard LAN1/2 Chip [Enabled] Allows you to enable or disable the onboard LAN1/2 chip. Configuration: [Disabled] [Enabled] Onboard LAN1/2 Boot [PXE] Allows you to configure the onboard LAN1/2 boot mode. Configuration: [Disabled] [PXE] [iSCSI] 4-26 Chapter 4: BIOS setup