Asus Z8PH-D12 SE QDR -Manual - Page 73
AHCI Configuration
View all Asus Z8PH-D12 SE QDR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
4.3.5 AHCI Configuration This menu is the section for AHCI configuration. Main BIOS SETUP UTILITY AHCI Settings AHCI CD/DVD Boot Time out [35] SATA Port1 [Not Detected] SATA Port2 [Not Detected] SATA Port3 [Not Detected] SATA Port4 [Not Detected] Some SATA CD/DVD in AHCI mode need to wait ready longer. AHCI CD/DVD Boot Time out [35] Selects the boot time out value for SATA CD/DVD devices in AHCI mode. Congifuration options: [0] [5] [10] [15] [20] [25] [30] [35] SATA Port1-4 [XXXX] Displays the status of auto-detection of SATA devices. Main BIOS SETUP UTILITY SATA Port1 Device :Not Detected SATA Port1 [Auto] SMART Monitoring [Enabled] Select the type of device connected to the system. SATA Port1 [Auto] Allows you to select the type of device connected to the system. Configuration options: [Auto] [Not Installed] SMART Monitoring [Enabled] Allows you to set the Self-Monitoring, Analysis and Reporting Technology. Configuration options: [Disabled] [Enabled] ASUS Z8NH-D12 Series 4-13