Audiovox FPE2608 Owners Manual - Page 11
Connecting A High-definition Hd Source, Connecting A Pc - resolution
View all Audiovox FPE2608 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN). To AUDIO IN jacks (YUV IN) To AUDIO OUT jacks * May require a subscription for receiving HD channels. Check with your cable/satellite service provider for details. To COMPONENT VIDEO IN jacks (YUV IN) To COMPONENT VIDEO OUT jacks NOTE When connecting a DVD player to the television, the picture resolution is solely dependent upon the resolution supported by the DVD player attached. DVD player resolutions vary from 480i to 1080i, and this unit can support DVD players up to a maximum resolution of 1080i. CONNECTING A PC Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on this unit using a monitor cable and audio cable (not included) as shown. Make sure you connect the cable from the computer (PC Connector and PC AUDIO) to this unit (PC IN MONITOR / VGA and AUDIO). FPE2608_ib_eng_1-13.pmd 10 E - 10 To PC AUDIO OUT jack To PC connector 1/15/2008, 12:54 PM