Audiovox FPE2608 Owners Manual - Page 21
Troubleshooting Guide
View all Audiovox FPE2608 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
TROUBLESHOOTING GUIDE SYMPTOM No power. The remote does not function. CAUSE (AND REMEDY) • Check that the AC power cord is connected. • The unit is not turned on. • Remove any obstacles between the remote and the unit. • Use the remote near the unit. • Point the remote at the remote sensor on the unit. • Replace the batteries in the remote with new ones. TV Bad Picture (snow, multiple images, distortion, blurry) • Check the location of the antenna and adjust it if necessary. • Make sure the antenna cable is firmly connected. • Make sure all input cables are firmly connected. Black and white picture. No picture or sound. Colored patches of picture. No sound is output from the HDMI out • Check the VIDEO MENU within the TV SETUP MENU. • Check to make sure the program you are watching is broadcast in color and not black & white. • Make sure the unit is plugged in and turned on. • Make sure that TV mode is selected. • Try a new channel to check for possible station trouble. • Make sure the antenna is connected properly. • Increase the volume. • Make sure the antenna or audio video source device is working properly. • Make sure all cables are firmly connected. • Check for local interference. • Make sure there are no unshielded electrical devices nearby that are causing interference. • Turn the unit off for 30 minutes, then try it again. • Check the connection between this unit and the HDMI out jack of other equipment. • See if the TV supports this 480p/576p/720p/1080i DVD system. • Check your TV system setup correctly. • Make sure your TV supports HDCP (High Bandwidth Digital Content Protection). FPE2608_ib_eng_14-21.pmd 20 E - 20 1/15/2008, 12:55 PM