Audiovox FPE3707HR Operation Manual - Page 18

Connect a PC HDMI 2 HDMI 1 DVI 2 IN DVI 1 IN Connections (continued) Audio cable (stereo mini plug) AUDIO AUDIO VGA cable (analog RGB) To monitor port (15-pin D-Sub) To audio output jack How to connect: Connect a VGA cable between the VGA(D-sub) interface on the PC and the VGA input interface on the unit. Connect an Audio cable between the AUDIO output on the PC and AUDIO input jack on the unit. To Watch the PC screen 1. Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use 5/6to select Analog RGB and then press OK to confirm. 2. Turn on your PC and check for PC system requirements. 3. Adjust the PC screen. Connect Headphone Insert the plug of the headphone into the TV's Headphone jack. When using headphone, adjust the headphone volume so as to avoid excessive levels, as hearing damage may result. S-VIDEO Headphone L R for software update only RS-232 Note: If your headphone do not match the jack, use a suitable plug adaptor. 16