Audiovox FPE3707HR Operation Manual - Page 39

Image Adjust for PC/Component Mode - Be sure to select the correct source (Analog RGB or Component) before operation. Image Adjust 1 Press MENU and then use 3or4 to display IMAGE ADJUST menu page, press 6 to enter. 2 Within the menu, use 5or6 to select, use 3or4 to adjust. 3 Press EXIT button to exit. IMAGE ADJUST Image size H position V position Frequency Phase Freeze Image H width V width FILL ALL 050 047 000 000 OFF 005 005 IMAGE ADJUST Image size H position V position Frequency Phase Freeze Image Auto Adjust FILL ALL 050 047 000 000 OFF >>> (IMAGE ADJUST menu in Component mode) (IMAGE ADJUST menu in PC mode) Option Function Image size Selects a desired image size (aspect ratio). The choice may be different in different mode.(refer to section in TV mode for details.) Note: you may directly press ZOOM button on the remote control to select. H position Move the image on the screen left/right. V position Move the image on the screen up/down Frequency Adjusts the sample frequency. Phase Improves the focussing of stable image. Freeze Image Select "ON" to freeze the image on the screen. Select "OFF" to reactivate the image. Note: you may directly press FREEZE button on the remote control to freeze the image, press again to restore. H width (component mode only) Adjusts the horizontal width of the image. V width (component mode only) Adjusts the vertical width of the image. Auto Adjust (PC mode only) Highlight "Auto Adjust" item and then use 3or4 button to start auto adjustment. The set will automatically adjust the image such as frequency, position setting, etc. 37