Audiovox FPE3707HR Operation Manual - Page 26

Setting Picture/Adjusting Image Picture Mode Selection You can select the picture quality instantly among three preset modes and one user-set mode. Press the PICTURE button repeatedly to select the desired picture quality. NATURE, SOFT, USER and BRIGHT can be selected cyclically. NATURE: Select for a normal picture. SOFT: Select for a finely detailed picture. BRIGHT: Select for a bright picture. USER: The picture quality you set. Image Size Adjustment IMAGE ADJUST You can make use of image size adjustment to choose the aspect ratio depending on the format of the received signal and your preference. Image Size H Position V Position Freeze Image FILL ALL 050 047 OFF Press the ZOOM button repeatedly to select the desired image size. You can also adjust Image size in the IMAGE ADJUST menu.  NORMAL Selects the proper picture proportion to match the source's image.( 4:34:3, 16:9  16:9)  WIDE This mode stretches the picture horizontally and at the same time still maintains a good aspect ratio at the center of the screen.  ZOOM This mode enlarges the picture in correct proportion.  FILL ALL This mode displays a picture at full screen size. Screen Position Adjustment 1 Navigate to the IMAGE ADJUST menu. IMAGE ADJUST Image Size H Position V Position Freeze Image FILL ALL 050 047 OFF 2 Highlight H Position or V Position item, use 3or4to make appropriate adjustments. Note:  You may perform screen position adjustment only for analog channels. It is unnecessary to adjust screen position for digital channels. To Freeze the Picture Press the FREEZE button to freeze the image on the screen (the video sources still run). Press again to restore. You can also set Freeze Image to ON in the IMAGE ADJUST menu to freeze the picture. To restore, set it to OFF. Note: If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. 24