Behringer AT108 Manual - Page 5

5 ULTRACOUSTIC AT108 User Manual 2. Wiring Tips Fig. 2.1 and 2.2 show you how to connect your guitar and your microphone to the amplifier. If you want to use an effects pedal (for example, the BEHRINGER X V-AMP) to experiment with some out-of-theordinary sounds, you can connect your guitar directly to the input of the effects processor. Then, connect a second cable from the effects output to the input on your amp. If you have an electronic tuner, please be sure to insert it pre effects device, so that the tuner only receives a dry signal without effects components. X V-AMP: no additional tuner required. ◊ The built-in loudspeaker is disabled automatically when you plug in the headphones ( 9 ).Fig. 2.1: Setup example using the ULTRACOUSTIC AT108 CD player Fig. 2.2 shows a recommended setup for amplifying the sound of your AT108 using a sound reinforcement system of any size. This way, you can also use your amp for playing live or for rehearsals with your band. EP2000 EUROLIVE B1520 PRO ADJUST 1 2 3 4 GAIN / VOLUME COPY CONFIGURE BASS EQ PRESENCE 2ND FUNCTION PEDAL BYPASS/TUNER Output Main Outputs ADJUST 1 2 3 4 GAIN / VOLUME COPY CONFIGURE BASS EQ PRESENCE 2ND FUNCTION PEDAL BYPASS/TUNER Output X V-AMP Input XENYX 2222FX X V-AMP Input HPS3000 Instrument input CD input Headphone Instrument input Headphone Acoustic guitar Mic input BEHRINGER ULTRATONE AT108 Microphone Fig. 2.1: Setup example using the ULTRACOUSTIC AT108 Acoustic guitar Fig. 2.2: Live setup BEHRINGER ULTRATONE AT108