Behringer EURODESK SX3282 Manual - Page 22

22 EURODESK SX3282 User Manual 14. Specifications Input Channels Mic input Type Mic E.I.N.1 (22 Hz - 22 kHz) @ 150 Ω source input shortened Distortion (THD + N) Gain range Max. input level Line input Type Gain range Max. input level Channel fader range Aux send gain range electronically balanced, discrete input circuit -129.0 dBu / -117.3 dBqp -132.0 dBu / -122.0 dBqp 0.007 % @ +4 dBu, 1 kHz, bandwidth 80 kHz +10 dB to +60 dB +12 dBu electronically balanced 0 dB to +40 dB +22 dBu +10 dB to -85 dB 0 dB to +15 dB / off Main Mix Section Noise2 bus noise @ fader 0 dB ‑102.0 dBr all input channels assigned & ‑92.0 dBr set @ 0 dB gain, channels muted all input channels assigned & ‑87.0 dBr set @ 0 dB gain Max. output level +28 dBu, balanced / +22 dBu, unbalanced Aux returns gain range 0 dB to +20 dB / off Aux sends max. output level +22 dBu System Data Distortion (THD + N) Frequency response 20 Hz to 40 kHz 10 Hz to 120 kHz 0.007 % @ +4 dBu, 1 kHz, bandwidth 80 kHz ±1 dB (any input to any output) ±3 dB Equalizer Hi shelving Hi Mid Bell (Ch 25‑32) Mid Sweep (Ch 1‑24) Lo Mid Bell (Ch 25‑32) Lo shelving Lo cut (HPF) Channel Inserts Max. in/out Channel to channel crosstalk 12 kHz, ±15 dB, Q fixed at 2 oct. 3 kHz, ±15 dB, Q fixed at 2 oct. 100 Hz to 8 kHz, ±15 dB, Q fixed at 1 oct. 500 Hz, ±15 dB, Q fixed at 2 oct. 80 Hz, ±15 dB, Q fixed at 2 oct. 75 Hz, 18 dB/oct. Power Supply Power consumption Mains voltage Fuse Mains connector Physical/Weight Dimensions (H x W x D) +22 dBu -95 dB @ 1 kHz Weight 1 Equivalent Input Noise 65 W 100 - 240 V~ (50/60 Hz) T 2 A H 250 V standard IEC receptacle approx. 3.5 x 40 x 20.7" approx. 90 x 1015 x 527 mm approx. 37.2 lbs / approx. 16.9 kg Subgroup Section Noise2 bus noise @ fader 0 dB ‑105.0 dBr all input channels assigned & ‑92.0 dBr set @ 0 dB gain, channels muted all input channels assigned & ‑87.0 dBr set @ 0 dB gain Submaster output max. output level +22 dBu, balanced / unbalanced Fader range +10 dB to ‑85 dB / off 2 ref. +4 dBu BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.