Behringer EURODESK SX3282 Manual - Page 5
Introduction, The manual, Before you get started, Caution - mixer manual
View all Behringer EURODESK SX3282 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
5 EURODESK SX3282 User Manual 1. Introduction 1.1 The manual ◊ Reading this manual will make you aware of the many possibilities the SX3282 offers you. Please keep this manual safely for future reference. Important notes concerning installation ◊ The sound quality may diminish within the range of powerful broadcasting stations and high-frequency sources. Increase the distance between the transmitter and the device and use shielded cables for all connections. 1.1.1 Nomenclature Most specialist subjects are not really all that difficult provided you understand the language used, and the vocabulary of mixing is pretty straight-forward. Nevertheless it is as well to be clear about what certain terms mean. A "slot" in a recorder will always be referred to as a track, while that in a mixer will invariably be a channel. A group will always refer to a sub-mix of channels. Similarly the term band will be mentioned only in conjunction with frequency. 1.2 Before you get started 1.2.1 Shipment Your product was carefully packed at the factory to ensure safe transport. Nevertheless, if the box is damaged inspect the unit immediately for signs of damage. ◊ If the unit is damaged please do NOT return it to us, but notify your dealer and the shipping company immediately; otherwise, claims for damage or replacement may not be granted. ◊ We recommend that you use a flight case to give the unit optimum protection during use or transport. ◊ Always use the original box to prevent damage during storage or transport. ◊ Make sure that children cannot play unsupervised with the unit or its packaging. ◊ Please ensure proper disposal of all packing materials. 1.2.3 Online Registration Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, it is our intention to have it repaired as quickly as possible. To arrange for warranty service, please contact the BEHRINGER retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (http://behringer.com). Registering your purchase and equipment with us helps us process your repair claims more quickly and efficiently. Thank you for your cooperation! 1.2.2 Initial operation Ensure adequate air supply and to avoid overheating do not place the unit near radiators etc. !! Caution ◊ Before you change the fuse, switch off the device and pull the plug to avoid electric shock or damage to the device. ◊ Blown fuses must be replaced by fuses of the correct rating! Please refer to the "Specifications" section for the applicable rating. For connection to the mains use the enclosed power cord with cold connector which complies with the relevant safety regulations. ◊ Please make sure that all devices are properly grounded. For your own safety, never remove or disable the ground conductors from the devices or on the power cords. The unit must always be connected to the mains outlet with a protective grounding connection.