Behringer EURODESK SX4882 Quick Start Guide - Page 17

32 EURODESK SX4882 Specifications Main Channel Strip Mic input Type Mic E.I.N.1 (22 Hz - 22 kHz) @ 150 Ω source input shortened Distortion (THD + N) Gain range Max. input level Line input Type Gain range Max. input level Channel fader range Aux send gain range Equalizer Hi shelving Hi mid sweep Lo mid sweep Lo shelving Lo cut (HPF) Channel Direct Out Max. output level Noise @ 0 dB gain Output impedance Tape returns Channel Inserts Max. in/out Channel to channel crosstalk Mix B Channel Strip Gain range Hi shelving Lo shelving Subgroup Section Noise2 bus noise @ fader 0 dB 24 chs. assigned (input B) & set @ 0 dB gain 16 chs. assigned (input B) & set @ 0 dB gain Submaster output max. output level Submaster insert max. output level Submaster insert max. input level Fader range electronically balanced, discrete input circuit -129.0 dBu / -117.3 dBqp -132.0 dBu / -122.0 dBqp 0.007 % @ +4 dBu, 1 kHz, bandwidth 80 kHz +10 dB to +50 dB +12 dBu (+32 dBu @ PAD) electronically balanced 0 dB to +40 dB (-20 dB to +20 dB @ PAD) +22 dBu +10 dB to -85 dB / off 0 dB to +15 dB / off 12 kHz, ±15 dB 300 Hz to 20 kHz, ±15 dB 50 Hz to 3 kHz, ±15 dB 80 Hz, ±15 dB 75 Hz, 12 dB/oct. +22 dBu -94 dBu 120 Ω ¼" jacks, balanced / unbalanced, globally switchable from +4 dBu to ‑10 dBV +22 dBu -95 dB @ 1 kHz 0 dB to +15 dB / off 12 kHz, ±15 dB 80 Hz, ±15 dB ‑102.5 dBr ‑92.5 dBr ‑94.5 dBr +22 dBu, balanced / unbalanced +22 dBu +22 dBu +10 dB to ‑85 dB / off Quick Start Guide 33 Main Mix Section Noise2 bus noise @ fader 0 dB 24 chs. assigned (input B) & set @ 0 dB gain 16 chs. assigned (input B) & set @ 0 dB gain Max. output level Aux returns gain range Aux sends max. output level System Data Distortion (THD + N) Frequency response 20 Hz to 40 kHz 10 Hz to 120 kHz Noise2 @ fader 0 dB 24 chs. assigned (input B) & set @ 0 dB gain 16 chs. assigned (input B) & set @ 0 dB gain Power Supply Power consumption Mains voltage Fuse Mains connector Physical/Weight Dimensions (H x W x D) Weight ‑101.0 dBr ‑92.5 dBr ‑94.5 dBr +28 dBu, XLR connector, balanced / +22 dBu, ¼" jacks, unbalanced 0 dB to +20 dB / off +22 dBu 0.007 % @ +4 dBu, 1 kHz, bandwidth 80 kHz < 0.02 %, 22 Hz to 22 kHz at normal operating levels, any input to any output, bandwidth 80 kHz ±1 dB (any input to any output) ±3 dB ‑102.5 dBr ‑92.5 dBr ‑94.5 dBr 250 W 100 - 240 V~ (50/60 Hz) T 3.15 A H 250 V standard IEC receptacle approx. 2.8" / 8.7 x 37 x 29.5" / approx. 72 mm / 220 x 940 x 750 mm approx. 61.2 lbs / approx. 27.72 kg